Motorola SB4100 manual SURFboard R, Powering Up the First Time

SURFboard R		Introduction Before You Begin Installation	Operation Basic Configuration Troubleshooting
To turn on your SB4100,	Powering Up the First Time
simply plug it in. It is not	You must allow 5 to 30 minutes to power up		• Send flashes while the SB4100 scans
necessary to unplug it when
	the first time because the SB4100 must find		for the send channel. When the
not in use.
	and lock on the appropriate channels for		send channel is locked, the light
	communications.		is solid green.
	1	Be sure that your computer is on and the	• Online flashes while the SB4100 is
		SB4100 is unplugged.	obtaining configuration information.
	2	Plug the SB4100 in and check that the	When the configuration information
			is obtained, the light is solid green.
		lights on the front panel cycle through	During normal operation, the Power, Receive,
		this sequence:
			Send, and Online lights are on and the Activity
		• Power flashes during a self-test. When
			light flashes when transferring data between
		the self-test is successfully complete,	the SB4100 and your computer.
		the light is solid green.

•Receive flashes while the SB4100 scans for the receive channel. When the receive channel is locked, the light is solid green.

TM

10