Motorola SB4100 manual SURFboard R, Equipment Check

SURFboard R

Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting

Equipment Check

Power cord

Before you begin the installation, check that you have:

Item Description

10/100Base-T shielded Ethernet cable

USB cable

SB4100

User Guide

CD-ROM

Power cord	Required to connect the SB4100 to the electrical outlet.
One 10/100Base-T shielded	Required for connecting to the Ethernet port.
Ethernet cable
One USB cable	Required for connecting to the USB port.
SB4100 User Guide CD-ROM	Contains User Guide and USB drivers necessary
	for connecting to USB port.

You need to purchase a 75-ohm coaxial cable with F-type connectors for connecting your SB4100 to the nearest cable outlet. If you have a TV attached to the cable outlet, you may need a 5-900 MHz splitter to use both the TV and the SB4100.

These items are readily available at consumer electronic stores and departments.

TM

4