Changes and improvements, Version history

TSC-30/IC Product Specification

11.Changes and improvements

§TSC-30/IC

Ver0.1 (July 31, 2007) Draft release

Ver0.2 (September 27, 2007)
2.	Pin layout	Pin layout was changed. (SW0, SW1, LED0, LED2, RxD_I)
3.	Pin functions	Pin functions were changed. (LED0, LED2, USB_PW, EEP-DI/JP11,
		EEP-CLK/JP10, JP3, JP8)

4-2.	Communication mode setting	Terminal number was changed from 57 to 37.
4-5.	Panel ID setting (USB mode)	Replaced setting of JP4 with JP5.
“6. Packing Specification” was added.

“7. Storage Specification” was added.

“8. Implementation Temperature Specification” was added. “9. Cleaning” was added.

Ver0.3 (November 29, 2007)
1-2. Outline	8-wire touch screen was added.
3. Pin function	Pin functions were changed. (USBVref, USB_PW, JP6, JP7)
4-3. Touch screen mode setting				8-wire touch screen mode was added.
6-6. Product name label specification				“Pb Free” was added.
Circuit Diagram	In USB mode, Vcc is 3.3V, it changed the circuit of the USB_PW terminal.
Circuit Diagram	A capacitor was added to a power I/F circuit.
Ver 1.0 (March 13, 2008)
First release
(Change from ver0.3.)
1-4. General specification			Input response time was added.
2. Pin layout and representation				Marking specification was changed.
3. Pin functions		“8-wire” was added.
3. Pin functions		“Sleep mode” was changed to “Power save mode”.
4-2. Communication mode setting				“Vcc” was changed to “USB Vbus”.
5-2. Vibration frequency			“In USB mode, Tolerance:±0.25%” was added.
9. Terminal Pin Specification was added.
Circuit Diagram		In USB mode, Self-powered mode was added.
Circuit Diagram		In USB mode, the part number of the resonator was changed.
Circuit Diagram		Revision 1 for first release.

Document number was added.

Document No. DER-S0008A