AG Neovo TSC-30/IC manual General specification, Usb

					TSC-30/IC Product Specification
1-4. General specification
	Item			Rating		Notes
Power supply voltage			DC 3.00V to 5.25V
Power consumption			125mW (standard)			Power supply voltage is 5V.
			30mW (standard)			Power supply voltage is 3.3V.
		Asynchronous serial	-20 ˚C to +85 ˚C
			(No dew condensation)
Operating Temp
		USB	0 ˚C to +70 ˚C
			(No dew condensation)
Temperature range at storing			-40 ˚C to +125 ˚C
			(No dew condensation)
	Communication scheme		Asynchronous, serial
	Communication rate		9600bps
Communication
	Data length		8bits			Each setting is fixed
scheme (serial)
	Stop bit		1bit
	Parity		None
	Transfer rate		USB Specification2.0 Full Speed
Communication
			Control transfer (command)
scheme (USB)	Transfer mode
			Interrupt transfer (coordinate)
Operation frequency			6MHz			Fixed to 6MHz
			(1) Point mode			Point Mode: Only when touch screen is
Coordinate output rate (point / second)			(2) 30p/s	(3) 50p/s
						input, pen-down ID is sent once. After
			(4) 80p/s	(5) 100p/s
						input ends, no pen-up ID is sent.
			(6) 130p/s	(7) 150p/s
Linearity error			±3 LSB
Input response time			10ms (TYP)			For coordinate mode, 150p/s,
						Serial mode
Coordinate resolution			10bit (1024×1024)			In the correction data function,
						resolution follows the setting value
Dimension (mm)			12×12×1.7

Document No. DER-S0008A 3 Version 1.0 ©2008 DMC Co., Ltd.