Linksys WAP2000 Chapter Advanced Configuration, Accessing the Web-Based Utility, Setup Setup

Page 10

Chapter 5

Chapter 5:

Advanced Configuration

The Access Point has DHCP enabled by default and should receive an IP address automatically from the DHCP server on your network.

If your network doesn’t have a DHCP server, a static IP address (192.168.1.245) can be assigned to the Access Point by performing the following steps:

1.Disconnect the power to the unit.

2.Using a straightened paper clip or similar object to hold down the reset button on the back panel of the Access Point.

3.Keep the reset button held down and reconnect the power to the unit. The reset button should be held until the WLAN LED lights up.

Accessing the Web-Based Utility

1.Open your web browser and enter the IP address of your Access Point into the Address field and press the Enter key. The Password screen will appear.

Address Field

2.The first time you open the web‑based utility, enter admin (the default user name) in the User name field and enter it again in the Password field. Click the OK button. You can change the Access Point’s password later from the Administration > Management screen.

Login Screen

Web-Based Utility

The first screen that appears is the Setup screen. This allows you to change the Access Point’s general settings. There are options on the left side of the screen: Setup, Wireless, AP Mode, Administration, and Status. Each option contains screens that will help you configure and manage the Access Point.

Advanced Configuration

Setup > Setup

This screen is used to enter names for the Access Point and configure the IP settings.

Setup > Basic Setup

Host Name  This is the host name assigned to the Access Point. This host name will be published to your DNS server if the Access Point is configured to acquire the IP address through DHCP. In that case, Linksys recommends to follow the company policy on the host name assignment. The default name is Linksys.

Device Name  You may assign any device name to the Access Point. This name is only used by the Access Point administrator for identification purposes. Unique, memorable names are helpful, especially if you are employing multiple access points on the same network.

Contact  Use this field to specify the contact string for your SNMP agent.

Location  Use this field to specify the location string for your SNMP agent.

Automatic Configuration - DHCP  Selected by default, this option is used if you have a DHCP server enabled on the LAN and want it to assign an IP address to the Access Point. 

Static IP Address  This option is used to assign a static or fixed IP address to the Access Point.

Wireless-G Access Point with Power Over Ethernet

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Wireless-G Access Point with Power Over Ethernet About This Guide About This GuideTable of Contents Appendix G Contact Information Chapter Chapter IntroductionRoaming Chapter Planning Your Wireless NetworkNetwork Topology Network LayoutFront Panel Chapter Product OverviewProduct Overview Back PanelPlacement Chapter InstallationInstallation Wall-MountConnecting the Access Point Accessing the Web-Based Utility Chapter Advanced ConfigurationAdvanced Configuration Setup SetupSetup Time Wireless Basic Wireless SettingsWireless Wireless Security WEPWPA-Personal aka WPA-PSK WPA2-PersonalWPA-Enterprise WPA2-Personal MixedWPA2-Enterprise Disable WPA2-Enterprise MixedWireless Wireless Connection Control Wireless Advanced Wireless SettingsWireless Vlan & QoS AP Mode Administration ManagementAdministration Log LogAdministration Firmware Upgrade Administration Factory DefaultAdministration Reboot Administration Configuration Management Status Local NetworkWireless Status WirelessWired Status System PerformanceChapter Troubleshooting Appendix a TroubleshootingAppendix a Troubleshooting Does the Access Point function as a firewall? Appendix B Appendix B Wireless Security ChecklistWireless Security Checklist General Network Security GuidelinesAppendix C Glossary Appendix CGlossary Glossary Smtp Simple Mail Transfer Protocol The standard Appendix C Specifications Appendix D SpecificationsAppendix D Limited Warranty Warranty InformationAppendix E Appendix F Regulatory InformationWireless Disclaimer Avis d’Industrie CanadaDansk Danish Miljøinformation for kunder i EU Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Appendix G Contact Information

WAP2000 specifications

The Linksys WAP2000 is a robust wireless access point designed to enhance connectivity for both home and small business environments. This device provides a reliable solution for extending the reach of your existing network, ensuring that users can access high-speed internet with minimal interruptions.

One of the main features of the Linksys WAP2000 is its dual-band capability, which operates on both the 2.4 GHz and 5 GHz frequency bands. This dual-band technology allows for greater flexibility and less interference, accommodating more devices while maintaining optimal performance. Users can connect to the 5 GHz band for bandwidth-intensive activities, such as streaming and online gaming, while the 2.4 GHz band serves well for general browsing and connecting older devices.

The WAP2000 is equipped with the latest 802.11n wireless standard, offering speeds of up to 300 Mbps. This high throughput makes it an efficient choice for businesses that require swift data transfers and reliable connections. Additionally, the device supports Multiple Input Multiple Output (MIMO) technology, which uses multiple antennas to send and receive more data simultaneously, further enhancing its performance and range.

For ease of installation, the Linksys WAP2000 features Power over Ethernet (PoE) support. This allows the device to receive power through the Ethernet cable, eliminating the need for separate power adapters and simplifying the setup process. Additionally, its browser-based setup utility provides a user-friendly interface for configuration, enabling users to customize settings easily.

Security is a critical concern for any network, and the Linksys WAP2000 addresses this with various security features. It supports WPA/WPA2 encryption protocols, protecting data transmitted over the network from unauthorized access. Furthermore, the device includes MAC address filtering, which allows users to control which devices can connect to the network.

With a sturdy design and compact form factor, the Linksys WAP2000 is suitable for a variety of deployment scenarios, whether mounted on walls or placed on desks. Its versatility and performance make it an excellent choice for users looking to improve their wireless connectivity, ensuring that both guests and employees can enjoy a seamless online experience. Overall, the Linksys WAP2000 is an essential addition to any network, providing high-speed internet access and robust security features to keep users connected and safe.
Top Page Image Contents