Linksys WAP2000 manual Wireless Wireless Security, Wep

Page 12

Chapter 5

Advanced Configuration

•B-Only This option is used when all wireless client devices connect to the Access Point at Wireless-B data rates (maximum speed of 11 Mbps).

•G-Only This option is used when all wireless client devices connect to the Access Point at Wireless-G data rates (maximum speed of 54 Mbps). Wireless-B clients cannot be connected in this mode.

•Mixed  This option allows both Wireless-B and Wireless‑G client devices to connect to the Access Point at their respective data rates. Wireless-G devices can be connected at Wireless-G data rates.

Wireless Channel  Select the appropriate channel to communicate between the Access Point and your client devices. The default is channel 6. You can also select Auto so that your Access Point will select the channel with the lowest amount of wireless interference while the system is powering up. Auto channel selection will start when you click the Apply button, it will take several seconds to scan through all the channels to find the best channel.

SSID Name  The SSID is the unique name shared among all devices in a wireless network. It is case-sensitive, must not exceed 32 alphanumeric characters, and may be any keyboard character. Make sure this setting is the same for all devices in your wireless network. The default SSID name is linksys-g.

SSID Broadcast  This option allows the SSID to be broadcast on your network. Click Enabled to broadcast the SSID to all wireless devices in range. Click Disabled to increase network security and prevent the SSID from being seen on networked PCs. The default is Enabled to make network configuration easier.

Change these settings as described here and click Apply to save your changes. Help information is available on the right side of the screen.

Wireless > Wireless Security

Change the Access Point’s wireless security settings on this screen.

Wireless > Wireless Security

Select SSID  Select any of the SSID names configured on the Basic Wireless Settings screen.

Wireless Isolation (between SSID)  Wireless Isolation prevents eavesdropping in the network. When it is Enabled, wireless frames received on this Access Point will not be forwarded to other wireless networks (SSIDs). For example, if you have a wireless hotspot, you may want to keep the wireless network (SSID) isolated from your other wireless networks (SSIDs). This is a global option applying to all SSIDs. The default is Enabled.

The following options are specific for each SSID:

Security Mode  Select the wireless security mode you want to use. The detailed options are described on the following pages:

•WEP

•WPA-Personal

•WPA2-Personal

•WPA2-Personal Mixed

•WPA-Enterprise

•WPA2-Enterprise

•WPA2-Enterprise Mixed

•RADIUS

NOTE: WPA stands for Wi-Fi Protected Access, which is a security standard stronger than WEP encryption and forward compatible with IEEE 802.11i. WEP stands for Wired Equivalent Privacy, Enterprise modes use a RADIUS server for authentication, while RADIUS stands for Remote Authentication Dial-In User Service.

To disable wireless security completely, select Disabled. The default is Disabled.

Wireless-G Access Point with Power Over Ethernet

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Wireless-G Access Point with Power Over Ethernet About This Guide About This GuideTable of Contents Appendix G Contact Information Chapter Chapter IntroductionChapter Planning Your Wireless Network Network TopologyRoaming Network LayoutChapter Product Overview Product OverviewFront Panel Back PanelChapter Installation InstallationPlacement Wall-MountConnecting the Access Point Chapter Advanced Configuration Advanced ConfigurationAccessing the Web-Based Utility Setup SetupSetup Time Wireless Basic Wireless SettingsWireless Wireless Security WEPWPA-Personal aka WPA-PSK WPA2-PersonalWPA2-Personal Mixed WPA-EnterpriseWPA2-Enterprise Disable WPA2-Enterprise MixedWireless Wireless Connection Control Wireless Advanced Wireless SettingsWireless Vlan & QoS AP Mode Administration ManagementAdministration Log LogAdministration Factory Default Administration Firmware UpgradeAdministration Reboot Administration Configuration Management Status Local NetworkStatus Wireless WiredWireless Status System PerformanceChapter Appendix a Troubleshooting TroubleshootingAppendix a Troubleshooting Does the Access Point function as a firewall? Appendix B Wireless Security Checklist Wireless Security ChecklistAppendix B General Network Security GuidelinesAppendix C Appendix C GlossaryGlossary Glossary Smtp Simple Mail Transfer Protocol The standard Appendix C Appendix D Specifications SpecificationsAppendix D Warranty Information Limited WarrantyAppendix E Appendix F Regulatory InformationWireless Disclaimer Avis d’Industrie CanadaDansk Danish Miljøinformation for kunder i EU Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Appendix G Contact Information

WAP2000 specifications

The Linksys WAP2000 is a robust wireless access point designed to enhance connectivity for both home and small business environments. This device provides a reliable solution for extending the reach of your existing network, ensuring that users can access high-speed internet with minimal interruptions.

One of the main features of the Linksys WAP2000 is its dual-band capability, which operates on both the 2.4 GHz and 5 GHz frequency bands. This dual-band technology allows for greater flexibility and less interference, accommodating more devices while maintaining optimal performance. Users can connect to the 5 GHz band for bandwidth-intensive activities, such as streaming and online gaming, while the 2.4 GHz band serves well for general browsing and connecting older devices.

The WAP2000 is equipped with the latest 802.11n wireless standard, offering speeds of up to 300 Mbps. This high throughput makes it an efficient choice for businesses that require swift data transfers and reliable connections. Additionally, the device supports Multiple Input Multiple Output (MIMO) technology, which uses multiple antennas to send and receive more data simultaneously, further enhancing its performance and range.

For ease of installation, the Linksys WAP2000 features Power over Ethernet (PoE) support. This allows the device to receive power through the Ethernet cable, eliminating the need for separate power adapters and simplifying the setup process. Additionally, its browser-based setup utility provides a user-friendly interface for configuration, enabling users to customize settings easily.

Security is a critical concern for any network, and the Linksys WAP2000 addresses this with various security features. It supports WPA/WPA2 encryption protocols, protecting data transmitted over the network from unauthorized access. Furthermore, the device includes MAC address filtering, which allows users to control which devices can connect to the network.

With a sturdy design and compact form factor, the Linksys WAP2000 is suitable for a variety of deployment scenarios, whether mounted on walls or placed on desks. Its versatility and performance make it an excellent choice for users looking to improve their wireless connectivity, ensuring that both guests and employees can enjoy a seamless online experience. Overall, the Linksys WAP2000 is an essential addition to any network, providing high-speed internet access and robust security features to keep users connected and safe.
Top Page Image Contents