Chapter 4
Chapter 4:
Installation
Placement
The Access Point can be placed horizontally on a flat surface such as a desktop so it sits on its four rubber feet or it can be mounted on a wall.
Desktop Placement
Wall-Mount
The unit has two sets of
You will need 2 suitable screws to mount the Access Point.
Suggested Mounting Hardware
|
NOTE: Linksys is not responsible for damages incurred by insecure
1.Determine where you want to mount the Access Point. Ensure that the wall you use is smooth, flat, dry and sturdy and make sure the location is within reach of the power outlet.
2.Drill two holes into the wall for either vertical or horizontal placement.
NOTE: The printed Quick Installation Guide that accompanies the Access Point includes templates that can be used for spacing between holes.
Installation
Horizontal Mounting
NOTE: The Access Point should be oriented as shown above for horizontal mounting.
Vertical Mounting
NOTE: The Access Point should be oriented as shown above for vertical mounting.
3.Insert a screw into each hole, and leave 3 mm of its head exposed.
4.Maneuver the Access Point so the
5.Place the