Linksys WAP2000 manual Setup Time, Wireless Basic Wireless Settings

Page 11

Chapter 5

Advanced Configuration

Setup > Basic Setup with Static IP

•LocalIPAddress  TheIPaddressmustbeuniquetoyour network. The default IP address is 192.168.1.245.

•Subnet Mask  The subnet mask must be the same as the LAN that your Access Point is connected to. The default is 255.255.255.0.

•Default Gateway  Enter the default gateway address, typically this is the IP address of your router.

•Primary DNS (Required) and Secondary DNS (Optional)  Your ISP will provide you with at least one DNS (Domain Name System) Server IP address.

Change these settings as described here and click Apply to save your changes. Help information is available on the right side of the screen.

Setup > Time

This screen allows you to change the Access Point’s time settings.Thecorrecttimesettingcanhelptheadministrator to search the system log to identify problems.

Setup > Time

You can set the time either manually or use the NTP option to automatically set the time from a time server if the Access Point can access the public Internet. NTP is the default setting.

Current Time  Displays the current time setting.

Manually  Select this option to set the date and time manually.

•Date  When the time is manually configured, this field is used to select the current date from the pull-down menus.

•Time  When the time is manually configured, this field is used to enter the time. The time is enter in a 24 hour format (hour : minutes : seconds).

NTP  Select this option if you want the Access Point to contact a public time server to get the current time.

•Time Zone  When NTP is enabled, the appropriate time zone must be selected.

•Automatically adjust clock for daylight saving changes  Select this option if you are in using the Access Point in a location that observes daylight saving time.

User Defined NTP Server  Enable this option if you have set up a local NTP server. Default is Disabled.

NTP Server IP  Enter the IP address of user defined NTP Server.

Change these settings as described here and click Apply to save your changes. Help information is available on the right side of the screen.

Wireless > Basic Wireless Settings

Change the basic wireless network settings on this screen. The Access Point can connect to up to four wireless networks (SSIDs) at the same time, so this screen offers settings for up to four different SSIDs.

Wireless > Basic Wireless Settings

Wireless Network Mode  Select one of the following modes. The default is Mixed.

•Disable  This option disables wireless connectivity completely. This is useful during system maintenance.

Wireless-G Access Point with Power Over Ethernet



Page 10 Page 12
Image 11
Page 10 Page 12
Contents Wireless-G Access Point with Power Over Ethernet About This Guide About This GuideTable of Contents Appendix G Contact Information Chapter Introduction ChapterNetwork Layout Chapter Planning Your Wireless NetworkNetwork Topology RoamingBack Panel Chapter Product OverviewProduct Overview Front PanelWall-Mount Chapter InstallationInstallation PlacementConnecting the Access Point Setup Setup Chapter Advanced ConfigurationAdvanced Configuration Accessing the Web-Based UtilityWireless Basic Wireless Settings Setup TimeWEP Wireless Wireless SecurityWPA2-Personal WPA-Personal aka WPA-PSKWPA2-Enterprise WPA2-Personal MixedWPA-Enterprise WPA2-Enterprise Mixed DisableWireless Advanced Wireless Settings Wireless Wireless Connection ControlWireless Vlan & QoS Administration Management AP ModeLog Administration LogAdministration Reboot Administration Factory DefaultAdministration Firmware Upgrade Status Local Network Administration Configuration ManagementStatus System Performance Status WirelessWired WirelessChapter Appendix a Appendix a TroubleshootingTroubleshooting Troubleshooting Does the Access Point function as a firewall? General Network Security Guidelines Appendix B Wireless Security ChecklistWireless Security Checklist Appendix BGlossary Appendix CAppendix C Glossary Glossary Smtp Simple Mail Transfer Protocol The standard Appendix C Appendix D Appendix D SpecificationsSpecifications Appendix E Warranty InformationLimited Warranty Regulatory Information Appendix FAvis d’Industrie Canada Wireless DisclaimerDansk Danish Miljøinformation for kunder i EU Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Contact Information Appendix G

WAP2000 specifications

The Linksys WAP2000 is a robust wireless access point designed to enhance connectivity for both home and small business environments. This device provides a reliable solution for extending the reach of your existing network, ensuring that users can access high-speed internet with minimal interruptions.

One of the main features of the Linksys WAP2000 is its dual-band capability, which operates on both the 2.4 GHz and 5 GHz frequency bands. This dual-band technology allows for greater flexibility and less interference, accommodating more devices while maintaining optimal performance. Users can connect to the 5 GHz band for bandwidth-intensive activities, such as streaming and online gaming, while the 2.4 GHz band serves well for general browsing and connecting older devices.

The WAP2000 is equipped with the latest 802.11n wireless standard, offering speeds of up to 300 Mbps. This high throughput makes it an efficient choice for businesses that require swift data transfers and reliable connections. Additionally, the device supports Multiple Input Multiple Output (MIMO) technology, which uses multiple antennas to send and receive more data simultaneously, further enhancing its performance and range.

For ease of installation, the Linksys WAP2000 features Power over Ethernet (PoE) support. This allows the device to receive power through the Ethernet cable, eliminating the need for separate power adapters and simplifying the setup process. Additionally, its browser-based setup utility provides a user-friendly interface for configuration, enabling users to customize settings easily.

Security is a critical concern for any network, and the Linksys WAP2000 addresses this with various security features. It supports WPA/WPA2 encryption protocols, protecting data transmitted over the network from unauthorized access. Furthermore, the device includes MAC address filtering, which allows users to control which devices can connect to the network.

With a sturdy design and compact form factor, the Linksys WAP2000 is suitable for a variety of deployment scenarios, whether mounted on walls or placed on desks. Its versatility and performance make it an excellent choice for users looking to improve their wireless connectivity, ensuring that both guests and employees can enjoy a seamless online experience. Overall, the Linksys WAP2000 is an essential addition to any network, providing high-speed internet access and robust security features to keep users connected and safe.
Top Page Image Contents