Airlink101 APSUSB211 user manual Setup Wizard

Page 19

9.2 Setup Wizard

The Setup Wizard page allows you to configure some basic settings of the Print Server, including specifying an optional password to log in to the Web Configuration Utility. This page is optional unless you want to setup a password for the Print Server.

Server Name: You can change the Print Server’s name to a more user-friendly name.

Port Name: You can change the Print Server’s port name.

Password: Enter a password (optional) for logging in to the Web Configuration Utility.

Note: Once you have setup a password, the username for logging in is admin.

Click Next to proceed.

18

Image 19

Contents Port USB 2.0 Print Server Model # APSUSB211 User’s Manual Table of Contents Introduction Package ContentsSystem Requirements Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration UtilityHome Setup Wizard Page Page Page Click Yes to save the settings, No to cancel the settings Change IP Address Printer Information Print Test Factory Reset Firmware Upgrade About Printing in Mac OS Using RendezvousPage Page Technical Support Appendix