Allied Telesis AT-MC602 manual Installing the AT-MC601 Subscriber Unit

Page 26

AT-MC601 and AT-MC602 Installation and User’s Guide

Installing the AT-MC601 Subscriber Unit

Using the

Subscriber Unit

on a Desktop

The AT-MC601 Subscriber unit will most likely be used as a stand-alone device, or can be used as a desktop device, or mounted onto a wall, using the keyholes on the bottom of the unit. The screws and plastic anchors used for mounting the unit are provided.

To use the Subscriber unit on a desktop, perform the following procedure:

1.Remove all equipment from the package and store the packaging material in a safe place.

2.Attach the four protective feet (provided) to each corner of the bottom of the unit, as illustrated in Figure 6.

LINK ERR

PSTN

LINE

ETHERNET EXTENDED VDSL MC601-AT

MGMT

PWR

ACT

LINK

100BaseTX 10BaseT/

Figure 6 Attaching Protective Feet to the Subscriber Unit

26

Image 26

Contents Installation and User’s Guide Page Electrical Safety and Emission Statement Declaration Of ConformityAT-MC601 and AT-MC602 Installation and User’s Guide Contents Appendix a Preface How This Guide is OrganizedDocument Conventions Contacting Allied Telesyn Technical Support Summary of Features Product DescriptionOverview Vdsl Line throughLocation of Components Front PanelsHardware Features Pin AssignmentPstn Port 10/100 Mbps Twisted Pair Ethernet Port Pass-through 6/1Pin MDI Signal MDI-X Signal TX+ RX+Line Port Color Description10/100Base-TX Port RS-232 Pin DIN Pin Signal Management CableAC Power Supply Input Port External AC/DC Power AdapterSoftware Features Installation Other Countries Installation Safety PrecautionsEurope-EC Additional Compliance Statements Selecting a Site for the Network Extender Cables Port Connector Cables Not IncludedUnpacking the Network Extender Installing the AT-MC601 Subscriber Unit Using Subscriber Unit On a DesktopPositioning The Switch Onto The Wall Screws Wall-Mounting Subscriber UnitPstn to Telephone Powering On Subscriber Unit Power On The Subscriber UnitInstalling the AT-MC602 Provider Unit Rack Mount Set on SliderRack Mount Set in Rack Internet Service Provider Provider UnitPowering On Provider Unit Warranty Registration Configuration Starting a Configuration Session Downloading Software Updates Cabling PreparationsOpening Configuration Software Configuring the Provider Unit Upstream/DownstreamMax Mbps Actual MbpsMin Mbps StatusApply AboutMean Square Error SNR of Received SignalCorrected RS errors /s Full Constellation LinkTC Synchronized Signal DetectedReduced Constellation Link Ethernet Encapsulation SyncCollision Counters Error CountersTxRx Counters ClearStop/Start Normal Configuring the Subscriber UnitInstall AT-MC601 and AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Run on S Side Error Message AT-MC601 and AT-MC602 Installation and User’s Guide Default Configuration Settings Environmental Specifications Technical SpecificationsPhysical Specifications Power SpecificationsSafety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Other Countries SafetyEurope-EC Sicherheit 6 Gefahr Durch Blitzschlag 6 Fare Under Uvejr SikkerhedEurope EC Veiligheid 6 Gevaar Voor BlikseminslagSécurité 6 Danger De FoudreStandardit Tämä tuote on seuraavien standardien mukainen 6 SalamaniskuvaaraStandard Questo prodotto è conforme ai seguenti standard 6 Pericolo Di FulminiSikkerhet 6 Fare For LynnedslagSegurança 6 Perigo De Choque Causado Por RaioSeguridad 6 Peligro De RayosSäkerhet 6 Fara För Blixtnedslag