Allied Telesis AT-MC602 manual Wall-Mounting Subscriber Unit

Page 27

Wall-Mounting

the Subscriber

Unit

AT-MC601 and AT-MC602 Installation and User’s Guide

The Subscriber unit can be mounted onto a wall using the keyholes on the bottom of the unit. The screws and plastic anchors used for mounting the unit are provided.

To wall-mount the Subscriber Unit, perform the following procedure:

1.If attached, remove the protective feet, data cables, and power cord from the unit.

2.Select a wall location for the device.

3.Install the screws and plastic anchors onto the wall, as shown in Figure 7.

LINK
ERR	PSTN
	LINE

ETNR	HEET
MGMT

EDDN
TEEX
LSVD	MC601-AT
	MC601-AT
	PWR
	ACT
LINK
aseT/100BaseTX
10B

Figure 7 Installing the Screws and Plastic Anchors Onto The Wall

4.Position the switch onto the wall screws so that the ports are facing the ceiling, as shown in Figure 8.

-MC601 AT

Figure 8 Positioning The Switch Onto The Wall Screws

27

Image 27

Contents Installation and User’s Guide Page Declaration Of Conformity Electrical Safety and Emission StatementAT-MC601 and AT-MC602 Installation and User’s Guide Contents Appendix a How This Guide is Organized PrefaceDocument Conventions Contacting Allied Telesyn Technical Support Product Description Summary of FeaturesVdsl Line through OverviewFront Panels Location of ComponentsPin Assignment Hardware FeaturesPass-through 6/1 Pstn Port 10/100 Mbps Twisted Pair Ethernet PortTX+ RX+ Pin MDI Signal MDI-X SignalColor Description 10/100Base-TX PortLine Port Management Cable RS-232 Pin DIN Pin SignalExternal AC/DC Power Adapter AC Power Supply Input PortSoftware Features Installation Installation Safety Precautions Europe-ECOther Countries Additional Compliance Statements Selecting a Site for the Network Extender Cables Not Included Cables Port ConnectorUnpacking the Network Extender Using Subscriber Unit On a Desktop Installing the AT-MC601 Subscriber UnitWall-Mounting Subscriber Unit Positioning The Switch Onto The Wall ScrewsPstn to Telephone Power On The Subscriber Unit Powering On Subscriber UnitRack Mount Set on Slider Installing the AT-MC602 Provider UnitRack Mount Set in Rack Provider Unit Internet Service ProviderPowering On Provider Unit Warranty Registration Configuration Downloading Software Updates Cabling Preparations Starting a Configuration SessionOpening Configuration Software Upstream/Downstream Configuring the Provider UnitStatus Actual MbpsMin Mbps Max MbpsAbout ApplyFull Constellation Link SNR of Received SignalCorrected RS errors /s Mean Square ErrorEthernet Encapsulation Sync Signal DetectedReduced Constellation Link TC SynchronizedClear Error CountersTxRx Counters Collision CountersStop/Start Configuring the Subscriber Unit InstallNormal AT-MC601 and AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Run on S Side Error Message AT-MC601 and AT-MC602 Installation and User’s Guide Default Configuration Settings Power Specifications Technical SpecificationsPhysical Specifications Environmental SpecificationsSafety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Safety Europe-ECOther Countries 6 Gefahr Durch Blitzschlag SicherheitSikkerhed Europe EC 6 Fare Under Uvejr 6 Gevaar Voor Blikseminslag Veiligheid 6 Danger De Foudre Sécurité6 Salamaniskuvaara Standardit Tämä tuote on seuraavien standardien mukainen 6 Pericolo Di Fulmini Standard Questo prodotto è conforme ai seguenti standard 6 Fare For Lynnedslag Sikkerhet 6 Perigo De Choque Causado Por Raio Segurança 6 Peligro De Rayos Seguridad 6 Fara För Blixtnedslag Säkerhet