MULTITASKER
14.[MODER]
This command sets the resolution of the video output.
Command Format: [MODERxCn]
x = Resolution (x = # from 0 to 7)
0= 640x480 (VGA)
1= 480p
2= 800x600 (SVGA)
3= 1024x768 (XGA)
4= 1280x1024 (SXGA)
5= 567p
6= 720p
7= 1080i
8= 1280x768 (WXGA)
9= 852x480 (WVGA)
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [MODER4C4] to set the resolution of the card in slot 4 to 1280x1024.
15.[BRIGHTm]
This command sets the brightness level to an absolute value.
Command Format: [BRIGHTmCn]
m= Level (m = # from 0 to 48, default=24) Cn = Card ID (n = # from 1 to max slots) Example:
Send the command [BRIGHT12C3] to set the output brightness to 12 on the card in slot 4.
16.[BRIGHT]
This command displays the brightness setting and makes the brightness function active for use with the [+] and
Command Format: [BRIGHTCn]
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [BRIGHTC4] to select the brightness function on C4. Then use the [+] and
17.[CONTRm]
This command sets the contrast level to an absolute value.
Command Format: [CONTRmCn]
m= Level (m = # from 0 to 48,default=40) Cn = Card ID (n = # from 1 to max slots) Example:
Send the command [CONTR30C4] to set the output contrast to 30 on the card in slot 4.
18.[CONTR]
This command displays the contrast setting and makes the contrast function active for use with the [+] and
Command Format: [CONTRCn]
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [CONTRC4] to select the contrast function on C4. Then use the [+] and
19.[COLORm]
This command sets the color level to an absolute value.
Command Format: [COLORmCn]
m= Level (m = # from 0 to 48,default=24) Cn = Card ID (n = # from 1 to max slots) Example:
Send the command [COLOR12C4] to set the output color level to 12 on the card in slot 4.
12 |