Altinex MT106-103 manual STA1, STA0, Card Control, 12, Inr

MULTITASKER

10.[STA1]

This command enables automatic feedback from the front panel. The command affects any card with auto-feedback capability, not just the MT106-103.The default at power on or reset is STA0, off. For more details, see the [?Cn] command definition.

Command Format: [STA1]

MT	Card Model Number
VR	Firmware Revision
RS	Resolution
BR	Brightness
CN	Contrast
CL	Color
SH	Sharpness
HU	Hue
CF	Comb Filter
NR	Noise Reduction
AR	Aspect Ratio
FZ	Freeze

Example 1:

Command = [MODER4C4]

Feedback = (RS04C04)

RS = Resolution

04= 1280x1024 (settings are 00-09)

C04 = Card ID/slot number

Example 2:

Command = [MODEA1C4]

Feedback = (AR0C04)

AR = Aspect Ratio

0= Wide 16:9 (1 = 4:3)

C04 = Card ID/slot number

11.[STA0]

This command disables automatic feedback from the card and front panel. The command affects any card with auto-feedback capability, not just the MT106-103card. The default at power on or reset is STA0, OFF.

Command Format: [STA0]

CARD CONTROL

12.[IN]

This command selects the input port on the card to be used as the source. The current image properties, like brightness and color, do not change when the input is selected.

Command Format: [INyCn]

y= Resolution (y = # from 0 to 3) 0 = S-Video

1 = Composite Video

2 = PC Bypass

3 = Component Video

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [IN0C4] to select the S-Video input.

13.[INR]

This command selects the input port on the card to be used as the source and recalls its previously saved settings.

Command Format: [INyRCn]

y= Resolution (y = # from 0 to 3) 0 = S-Video

1 = Composite Video

2 = PC Bypass

3 = Component Video

R= Recall video adjustment settings Cn = Card ID (n = # from 1 to max slots) Example:

Send the command [IN0RC4] to select the S-Video input and recall the settings saved for the S-Video input. For example, any changes made to the brightness, hue etc. that were saved will be recalled.

400-0394-007 11