MULTITASKER
TROUBLESHOOTING GUIDE | 8 |
We have carefully tested and have found no problems in the supplied
8.1 NO DISPLAY
Cause 1: | The source has a problem. |
Solution: | Check the source and make sure |
| that there is a signal present and all |
| source connections are correct. If |
| the source is working and there is |
| still no display, see Cause 2. |
Cause 2: | The card output is not selected. |
Solution: | Select the card output. See |
| accessible commands in Section 7. |
| If no display is present, see |
| Cause 3. |
Cause 3: | Cable connections are incorrect. |
Solution: | Make sure that cables are properly |
| connected. Also, make sure that the |
| continuity and wiring are good. If |
| there is still no display present, see |
| Cause 4. |
Cause 4: | The display has a problem. |
Solution: | Make sure the display is powered |
| and is turned on. If there is still no |
| display, please call ALTINEX at |
| (714) |
ALTINEX POLICIES | 9 |
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
21 |