MULTITASKER
20.[COLOR]
This command displays the color setting and makes the color function active for use with the
[+]and
Cn = Card ID (n = # from 1 to max slots) Example:
Send the command [COLORC4] to select the color function on C4. Then use the [+] and
21.[SHARPm]
This command sets the sharpness level to an absolute value.
Command Format: [SHARPmCn]
m= Level (m = # from 0 to 48,default=10) Cn = Card ID (n = # from 1 to max slots) Example:
Send the command [SHARP05C4] to set the output sharpness to 5 on the card in slot 4.
22.[SHARP]
This command displays the sharpness setting and makes the sharpness function active for use with the [+] and
Command Format: [SHARPCn]
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [SHARPC4] to select the sharpness function on C4. Then use the [+] and
23.[HUEm]
This command sets the hue level to an absolute value.
NOTE: The Hue adjustment does not apply to Component Video.
Command Format: [HUEmCn]
m= Level (m = # from 0 to 48,default=0) Cn = Card ID (n = # from 1 to max slots) Example:
Send the command [HUE30C4] to set the output hue level to 30 on the card in slot 4.
24.[HUE]
This command displays the hue setting and makes hue the active function for use with the [+] and
NOTE: The Hue adjustment does not apply to Component Video.
Command Format: [HUECn]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
Send the command [HUEC4] to select the hue function on C4. Then use the [+] and
25.[MODET]
This command is used to turn the 3D Comb Filter, Y/C Separator either on or off. The filter should be on when using a VCR input and off when using other formats.
Command Format: [MODETpCn]
p = Filter ON/OFF (p = 0 or 1)
0= OFF (default)
1= ON (VCR Mode)
Cn = Card ID (n = # from 1 to max slots)
Example:
A VCR will be used to play a video tape. Send the command [MODET1C4] to turn on the 3D Comb Filter for the
13 |