D-Link DVG-2032S user manual Calling Feature Instructions

Page 34

Calling Feature Instructions:

Call Hold: Ongoing call will be put on hold after FLASH button pressed on the phone set. The gateway will play a repeating music to the remote end.

Call Transfer: Ongoing call will be put on hold after FLASH button pressed on local phone set (gateway plays a repeating music to the remote end). Meanwhile, local user can dial out to another number after dial tone observed. After the handset is back on the hook, the call on hold will then be transferred to the new call regardless of the status of the new call. If wrong number is dialed for the new call, just press the FLASH button to get back the call on hold. In another case, if the local user doesn’t hang up the phone after new call sets up, press FLASH button to switch between the first call and the new call. Please be informed that PBX between phone sets and the gateway must support FLASH features to make this function work correctly. If a phone set is connecting directly to the FXS port of the gateway and not functioning to FLASH, please adjust the settings in “Flash Detect Time” in category “Advanced Options”.

Example of a Three-Way calling:

1.Alex dials to Bob, Bob answers that call.

2.Alex presses Flash and call to Coral (Bob is on hold), Coral answers that call.

3.Alex dials *61 then presses Flash, thus conference call is created.

Or

4.Alex dials to Bob, Bob answers that call.

5.Coral dials to Alex (Call Waiting), Alex presses Flash to pick the second call and talk to Coral.

6.Alex dials *61 then presses Flash, thus conference call is created.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DVG-2032S Voip Gateway Page Contents Coding Principle Introduction Product OverviewProduct Features Call features optionalFront Panel Hardware DescriptionRear Panel Network Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Example for DVG-2032S DVG-2032S connecting directly to phone setsTelephone Interface Description Integrating the DVG-2032S with PBXIVR Interactive Voice Response Basic Settings of a GatewayPreparation Instructions Save SettingsTo inquire about current Gateway’s WAN Port IP address IVR Functions Table Function Code Description ExampleFunction Code Description Example Subnet Mask Settings Static IP Settings Function Command Select a Static IPIP address Settings Default Gateway SettingsPPPoE Account Settings PPPoE Character Conversion Table Network Settings WAN InstructionsPage Setting Static IP IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Adsl PPPoE SettingsBigPond for Australia use only DNS SettingsClone MAC Using Phone Books Manager LAN interface mode※ Network Settings LANLAN IP/Subnet mask QoS Settings WAN QoSNAT/DDNS NAT TraversalDdns Telephony Settings Hotline Functions SIP 164 System FXS Representative number registers to Proxy Each line registers to Proxy independentlyCalling Features Calling Feature Instructions Advanced Options Line Settings CodecFax Settings Drop Silent Call Timeout Set the time to hang up the phone Phone Book Digit MapSpeed Dial Caller Filter ACL for ManagementCPT/Cadence Settings CDR SettingsLanguage System Information Stun Inquiry RTP Packet SummaryPing Test Backup/Restore SnmpProvision Settings System Operations Save SettingsSoftware Upgrade LogoutIP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing FlowEnd
Top Page Image Contents