D-Link DVG-2032S user manual Network Settings LAN, LAN interface mode※, LAN IP/Subnet mask

Page 23

19

Network Settings (LAN)

LAN interface mode※

Router: The system serves as a router with NAT.

Bridge: The system serves as a bridge between WAN port and LAN port without NAT. (LAN default gateway will still be accessible for configuration).

LAN IP/Subnet mask

Gateway LAN Port IP address and the subnet mask value.

Port of Web Access from WAN: Http port for WAN. To make this setting, the LAN Port must be used. WAN Port cannot make this setting. Always use port 80 when connecting to LAN port. 0 is to disable http port for WAN.

Enable Web UI: It disables any access from WAN and LAN if ticked.

Enable Telnet Service: It allows user to make settings from Telnet.

Image 23

Contents DVG-2032S Voip Gateway Page Contents Coding Principle Product Overview IntroductionCall features optional Product FeaturesRear Panel Hardware DescriptionFront Panel Gateway Assigned with a Public IP Address Network InterfaceGateway in a NAT network Integrating the DVG-2032S with PBX DVG-2032S connecting directly to phone setsTelephone Interface Description Example for DVG-2032SPreparation Basic Settings of a GatewayIVR Interactive Voice Response To inquire about current Gateway’s WAN Port IP address Save SettingsInstructions Function Code Description Example IVR Functions TableFunction Code Description Example Default Gateway Settings Static IP Settings Function Command Select a Static IPIP address Settings Subnet Mask SettingsPPPoE Account Settings PPPoE Character Conversion Table Instructions Network Settings WANPage Adsl PPPoE Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Setting Static IPClone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ WAN QoS QoS SettingsNAT Traversal NAT/DDNSDdns Telephony Settings Hotline Functions SIP 164 System Each line registers to Proxy independently FXS Representative number registers to ProxyCalling Features Calling Feature Instructions Advanced Options Codec Line SettingsFax Settings Drop Silent Call Timeout Set the time to hang up the phone Speed Dial Digit MapPhone Book ACL for Management Caller FilterLanguage CDR SettingsCPT/Cadence Settings System Information Ping Test RTP Packet SummaryStun Inquiry Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd