35
Digit Map
There are 50 sets of leading digit entries to choose voice routing interface – Auto select, PSTN or VoIP.
Default Call Route: The default call route can be Auto, VoIP and Deny.
Auto (VoIP first): The call route is VoIP first, and the next is Deny.
VoIP: The call route is VoIP only.
Deny: The call will be deny if the
Enable: Enable detection of this entry.
Leading Digits: The leading digits for the gateway to scan while user is dialing.
Total Digit Count: Total number of digits that the gateway should accept. 0 is that the gateway scans leading digits only and disregards total digit count.
Route: The interface calls should go through if above conditions satisfied.
Phone Book
This system can set up and store 100 phone numbers into a phone book and provides an IP address query when calling to other gateway(s). If no Phone books manager is set within a gateway group, then all Gateway systems have to set up phone data for each the gateway to communicate with each other.
Gateway Name: Enter other gateways’ code or an
Gateway Number: Enter the desired number of other Gateways.
IP/Domain Name: Enter the IP address or URL (Uniform Resource Locator) of other gateways.
Port: Enter other Gateways’ listen port.
Speed Dial
It can set up 100 numbers for speed dialing. Setting methods are as follows.