SNMP
Enable SNMP Agent: Enable SNMP if ticked.
Get/Set/Trap Community: Enter Community name to Read, Write and Trap.
Trap Host: Enter the IP of Trap Host.
NTP
This is the time setting. After the gateway is on the Internet, it will set its watch with Time Server.
Time Zone: Set the Time Zone where the gateway resides.
Time Server #1~#3: Set the Time Server where the gateway should sync up during start up. (NTP protocol)
Backup/Restore
You can backup settings to a file and restore settings from that file. You also can restore all settings back to default by selecting Restore Default Configurations and click Restore.
Note: It needs to Save Settings and Restart, and all settings will back up default settings or have new setting that you upload.
Configuration File: Backup the all settings.
Configuration Template File: Backup the settings as template file for editing.