D-Link DVG-2032S user manual IP Sharing Functions

Page 47

43

2. IP Sharing Functions

All Gateway series have a built-in IP sharing function. The settings and instructions at a PC end are described below:

Current Intranet only supports static IP mode, and the settings at the PC end are as follow: Available IP address Range : 192.168.8.1 – 192.168.8.253 (default address of Gateway is 192.168.8.254)

Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.8.254

The above values vary with different LAN Port Settings.

Assume Gateway’s LAN settings are,

IP address : 192.168.3.1

Subnet Mask

: 255.255.255.0

Then, the settings at PC end should be as follows:

Valid IP address range : 192.168.3.2 – 192.168.3.254

Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.3.1

WAN Port	LAN Port connected to
Connected to	Intranet
Internet

Image 47

Contents DVG-2032S Voip Gateway Page Contents Coding Principle Product Overview IntroductionCall features optional Product FeaturesRear Panel Hardware DescriptionFront Panel Gateway Assigned with a Public IP Address Network InterfaceGateway in a NAT network Integrating the DVG-2032S with PBX DVG-2032S connecting directly to phone setsTelephone Interface Description Example for DVG-2032SPreparation Basic Settings of a GatewayIVR Interactive Voice Response To inquire about current Gateway’s WAN Port IP address Save SettingsInstructions Function Code Description Example IVR Functions TableFunction Code Description Example Default Gateway Settings Static IP Settings Function Command Select a Static IPIP address Settings Subnet Mask SettingsPPPoE Account Settings PPPoE Character Conversion Table Instructions Network Settings WANPage Adsl PPPoE Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Setting Static IPClone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ WAN QoS QoS SettingsNAT Traversal NAT/DDNSDdns Telephony Settings Hotline Functions SIP 164 System Each line registers to Proxy independently FXS Representative number registers to ProxyCalling Features Calling Feature Instructions Advanced Options Codec Line SettingsFax Settings Drop Silent Call Timeout Set the time to hang up the phone Speed Dial Digit MapPhone Book ACL for Management Caller FilterLanguage CDR SettingsCPT/Cadence Settings System Information Ping Test RTP Packet SummaryStun Inquiry Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd