D-Link DVG-2032S user manual System

Page 31

27

Enable Support of SIP Proxy Server / Soft Switch: Enable the functions to inter-work with Proxy Server / Soft Switch. When SIP Proxy 1 and 2 are enabled, the system will register to SIP Proxy 2 after all lines are failed to register to SIP Proxy 1. SIP Proxy 2 is a backup

system.

Proxy Server IP/Domain: Enter the Proxy Server IP address or URL (Uniform Resource Locator). You can set 3 redundant Proxy spread by semicolon.

EX: 61.123.231.1;12.34.56.78;proxy.sip.sip

Proxy Server Port: Enter the Proxy Server listen port number. (The factory default value is 5060)

Proxy Server Realm: Enter the correct registered Proxy Server Realm name to avoid registration failure. If you fail to make a call, please contact your ITSP.

TTL: Enter the desired time interval at which the gateway will report to you Proxy Server.

SIP Domain/Use Domain to Register: Enter the correct SIP domain to avoid registration failure (it is not necessary to set with some Proxy Servers). If you enable “Uses Domain to Register” the gateway will register to Proxy with the domain name you filed. Else, the gateway will register to a Proxy with the IP it resolves. If you fail to make a call, please contact your ITSP.

Bind Proxy Interval for NAT: This function is able to keep the binding is existed when the gateway is behind NAT and SIP Proxy is not able to keep the binding.

Image 31

Contents DVG-2032S Voip Gateway Page Contents Coding Principle Product Overview IntroductionCall features optional Product FeaturesFront Panel Hardware DescriptionRear Panel Gateway Assigned with a Public IP Address Network InterfaceGateway in a NAT network Integrating the DVG-2032S with PBX DVG-2032S connecting directly to phone setsTelephone Interface Description Example for DVG-2032SIVR Interactive Voice Response Basic Settings of a GatewayPreparation Instructions Save SettingsTo inquire about current Gateway’s WAN Port IP address Function Code Description Example IVR Functions TableFunction Code Description Example Default Gateway Settings Static IP Settings Function Command Select a Static IPIP address Settings Subnet Mask SettingsPPPoE Account Settings PPPoE Character Conversion Table Instructions Network Settings WANPage Adsl PPPoE Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Setting Static IPBigPond for Australia use only DNS SettingsClone MAC Using Phone Books Manager LAN interface mode※ Network Settings LANLAN IP/Subnet mask WAN QoS QoS SettingsNAT Traversal NAT/DDNSDdns Telephony Settings Hotline Functions SIP 164 System Each line registers to Proxy independently FXS Representative number registers to ProxyCalling Features Calling Feature Instructions Advanced Options Codec Line SettingsFax Settings Drop Silent Call Timeout Set the time to hang up the phone Phone Book Digit MapSpeed Dial ACL for Management Caller FilterCPT/Cadence Settings CDR SettingsLanguage System Information Stun Inquiry RTP Packet SummaryPing Test Snmp Backup/RestoreSystem Operations Save Settings Provision SettingsLogout Software UpgradeIP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow InstructionEnd