Motorola Canopy Backhaul Module user manual

Page 31

•ERROR: No Sync Pulse: If the module is set to receive a sync pulse from an outside source (not itself) and it is currently not receiving the pulse this message will be displayed. When this message is displayed the access point module will turn its transmitter off so as to not create any self-interference within the Canopy System.

Radio Slicing Value: displays information to be used be Canopy technical support.

Radio Transmit Gain Setting: displays information to be used by Canopy technical support.

Site Name: displays information relating to the name of the physical module. This parameter can be set by the operator on the Configuration web page. This information is set into the sysName SNMP MIB-II object and can be polled via a SNMP management server.

Site Contact: displays contact information for the physical module. This parameter can be set by the operator on the Configuration web page. This information is set into the sysContact SNMP MIB- II object and can be polled via a SNMP management server.

Image 31

Contents User Manua L Important Note on Modifications Exposure Note Hardware Warranty in U.S Trademarks, Product Names, and Service Names Table of Contents Getting Started Accessories Appendix Specifications Document Change History Getting StartedCanopy Backhaul Product DescriptionModule Description Operational Mode Alignment Mode Background Information on Networking Definitions System Overview and Site PlanningCanopy Backhaul Masters Slave Site Selection CriteriaPage General Considerations GHz Recommended Frequencies Channel PlansLightning Protection Networking InformationElectrical Requirements Reflector dishes Security DES Encryption Advanced FeaturesSecurity AES Encryption Branding Password password-if-configuredSpecific information on this MIB see RFC 1213 for details Configuration of the Backhaul Modules InstallationUnpack the Canopy Products Installation of the equipment Alignment Click Enable Aiming ModeMAC Address ESN Non-auto-sensing Auto-sensing CablingRJ-45 Crossover Timing Master Timing Slave Interface ScreensQuick Start Timing MasterStatus Page Configuration Luid Webpage Auto Update the web-based interface. never refresh Canopy Default Plug Luid Select Event LogTime & Date Link TestSessions Ethernet Stats GPS StatusExpanded Stats Timing Slave Page Configuration Webpage Auto Update the web-based interface. never refresh AP Eval Date Ethernet Stats Link Test Alignment BER Display Accessories Class Network Portion Host Portion AppendixHTTP, FTP, SNMP, DES SpecificationsWith passive reflector Lbs kg