Average Jitter: displays the average Jitter value for the subscriber module.
Last Jitter: displays the last Jitter value for the subscriber module.
GPS Status
The GPS Status web page displays information about latitude, longitude, height, satellites seen and tracked when the access point module is configured to sync to received signal and is connected to a Cluster Management Module.
Ethernet Stats
The Packet Stats web page reports TCP throughput and error information for the Ethernet connection of the subscriber module. The following definitions are available:
inoctets count: displays the total number of octets received on the interface, including framing characters.
inucastpkts count: displays the total number of
innucastpkts count: displays the total number of
indiscards count: displays the total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their be deliverable to higher layer protocol. One possible reason to discard could be to free up buffer space.
inerrors count: displays the total number of inbound packets that contained errors preventing them from being delivered to a higher layer protocol.
inunknownprotos count: displays the total number of packets received via the interface which were discards because of an unknown or unsupported protocol.
outoctets count: displays the total number of octets transmitted out of the interface, including framing characters.
outucastpkts count: displays the total number of packets that
outnucastpkts count: displays the total number of packets that
outdiscards count: displays the total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
outerrrors count: displays the total number of outbound packets that could not be transmitted because of errors.
RxBabErr: displays the total number of receiver babble errors.