THE INTERFACE SCREENS
The Canopy backhaul module contains a series of web pages that are used to interface to the unit. The following is a quick reference to interface screens. Note: These screens are subject to change by subsequent software versions. To access the web based interface you first must be on a computer that is in some way connected to the access point module. This can be done either directly or through a network. Enter the IP address of the backhaul module (default is 169.254.1.1) into the address bar of your browser and hit enter on your keyboard.
The backhaul module will have two different sets of interface screens, one for the timing master and one for the timing slave. The master and slave’s interface screens are very similar to that of the access point module and subscriber module respectively.
The following web based interface pages are accessible:
Timing Master | Timing Slave |
Quick Start | Status |
Status | Configuration |
Configuration | Event Log |
Event Log | AP Eval Data |
LUID Select | Ethernet Stats |
Link Test | Extended Stats |
Time & Date |
|
Sessions |
|
GPS Status |
|
Ethernet Stats |
|
Extended Stats |
|