ADTRAN QFO-C warranty Changing the Port Service State, Port Service Status Screen

NOTE

Port 0 is the QFO-C access module itself.

Changing the Port Service State

From the Service State Screen, type the desired port number and press Enter. The Port Service Status Screen (Figure 9) will appear.

Type the number corresponding to the desired service state. Press Enter.

From the Provisioning screen (Figure 7) type Ò2Ó and press Enter to select All Provisioning. The Provisioning of All Ports Screen (Figure 10) will appear.

Shelf:	Slot:	10	Total Access System	07/15/99 10:42
Unacknowledged Alarms:			MINOR
			Port 1: Out of Service - Unassigned
			1. In Service
			2. Out of Service - Unassigned
			3. Out of Service - Maintenance
			Selection:
			‘?’ - System Help Screen
		Figure 9. Port Service Status Screen
Shelf:	Slot:	10	Total Access System	07/15/99 10:45
Unacknowledged Alarms:			MINOR
		Provisioning for All Ports
		1.	DSX Equalization	0 to 133' ABAM
		2.	Loopback Timeout	120 Min.
		3.	AIS to DSX (Loss of T1)	Disabled
		4.	AIS to DSX (FLOS)	Disabled
		5.	Restore Factory Defaults

Selection:

‘?’ - System Help Screen

Figure 10. Provisioning of All Ports Screen

14 Section 61181300L1-5C, Issue 3 61181300L1-5C