Table 8. QFO-C Provisioning Options
Option | Description | Values | Default |
|
|
|
|
Service State | Enables normal connection to the DSX or multiplexer | In Service | Out of Service- |
| interface |
| Unassigned |
| Loops will train up but will not connect to the DSX or | Out of Service - |
|
| multiplexer interface | Unassigned |
|
| Supports active connections to the DSX or multiplexer | Out of Service - |
|
| interface; however, alarms cannot be generated | Maintenance |
|
DSX Equalization | Conditions the signal to provide a proper 0dB level | 0 to 133' ABAM | 0 to 133' ABAM |
| output to the DSX | 134 to 266' ABAM |
|
|
| 267 to 399' ABAM |
|
|
| 400 to 533' ABAM |
|
|
| 534 to 655' ABAM |
|
Loopback Timeout | Releases a | Disabled | 120 minutes |
| after initial activation | 20 minutes |
|
|
| 60 minutes |
|
|
| 120 minutes |
|
AIS to DSX (Loss of T1) | Generates AIS to network on LOS from facility for a | Enabled, Disabled | Disabled |
| specific port |
|
|
AIS to DSX (FLOS) | Generates AIS to network on all ports on Fiber LOS | Enabled, Disabled | Disabled |
| from facility |
|
|
ES Threshold | Enters a specific ES | 30, 150 | 150 |
| exceeded, will generate an alarm |
|
|
SES Threshold | Enters a specific SES | 15, 75 | 75 |
| exceeded, will generate an alarm |
|
|
UAS Threshold | Enters a specific UAS | 15, 75 | 75 |
| exceeded, will generate an alarm |
|
|
ES Threshold | Enters a specific ES daily threshold that, when exceeded, | 2880, 14400 | 14400 |
| will generate an alarm |
|
|
SES Threshold | Enters a specific SES daily threshold that, when | 1440, 7200 | 7200 |
| exceeded, will generate an alarm |
|
|
UAS Threshold | Enters a specific UAS daily threshold that, when | 1440, 7200 | 7200 |
| exceeded, will generate an alarm |
|
|
Circuit ID (one for each port) |
| Null string | |
|
|
|
|
8 | Section |