Performing Loopback Testing
1.From the Test Screen, type the number that corresponds to the desired port and press Enter. The Port Test Screen (Figure 29) displays.
2.Type Ò1Ó and press Enter for remote loopback testing. Type Ò2Ó and press Enter for network loopback testing. Figure 30 displays the Loopback RT screen. Type the number of the desired remote test and press Enter.
Shelf: Slot: | Total Access System | 02/18/98 02:24:18 | |
Unacknowledged Alarms: None |
|
|
|
Port 1/2/3/4 Test |
| ||
1. | Loopback | RT | Disabled |
2. | Loopback | DSX | Disabled |
Selection:
‘?’ - System Help Screen
Figure 29. Port Test Screen
Shelf: Slot: | Total Access System | 02:24:18 02/18/98 |
Unacknowledged Alarms: None |
|
|
Loopback RT: Disabled
1.Disabled
2.Network
3.Dual
Selection:
‘?’ - System Help Screen
Figure 30. Loopback RT Screen
24 | Section |