Connecting a 3Com Wireless Access Point 25
4After you make the final connection, check the LCD display on the telephone. Information appears when the telephone attempts to download information from the NBX system.
If you see nothing in the LCD display, see “Solving NBX Telephone Problems” in Chapter 3.
Connecting a 3Com Figure 9 shows how to connect a 3Com Wireless Access Point. You do
Wireless Access not need a power splitter for this end device.
Point
See Figure 5 in Chapter 1 for a typical network topology with the EPS and the 3Com Wireless Access Point.
Using Category 5 cable that has been checked for continuity on all eight wires, connect an EPS output port (a port on the upper row of connectors) to the data jack closest to the 3Com Wireless Access Point.
The connection may involve multiple segments such as the patch panel and premises cabling shown in Figure 9. The total length of the connection path should not exceed 100 meters.
Figure 9 Connecting the EPS to a 3Com Wireless Access Point
Ethernet Power Source | 3Com Wireless | |
Access Point | ||
|