3Com 3C10220 manual Wiring, hubs, and switches

Solving Wireless Access Point Problems 33

Table 8 Solving Wireless Access Point Problems (continued)

Problem	Possible Cause	Suggested Action
	Faulty EPS	■ Follow the procedures
		described in Table 6 to
		determine if the EPS is faulty.
The Wireless Access Point is	Faulty network	■ Check all physical connections
receiving power, but the	connection	between the Wireless Access
network indicator (center		Point and the LAN (network).
LED) does not flash.		Check patch panels, premises
		wiring, hubs, and switches.

If none of these procedures identifies the problem, contact an authorized 3Com service representative for additional assistance.