ADC user manual September 25 Installation, Installing the EMU-830 into Slot 17 of EMS-830

September 25, 2006 Chapter 2: Installation

Step Action

2Align the EMU-830 card with the card guides at the top and bottom edges of Slot 17, then push the card in until the EMU-830 front panel is flush with the front of the shelf (Figure 2-3). The connector positions in slots 1 through 16 prevent the EMU-830 from being installed in the wrong slot.

EMS-830 shelf

EMU-830

	Figure 2-3. Installing the EMU-830 into Slot 17 of EMS-830
3	Tighten the two captive retaining screws on the front of the EMU-830 card.

LTPE-UM-3159-02 2-3