ADC EMU-830 user manual Console port

Chapter 2: Installation September 25, 2006

Step Action

1Connect a serial cable from the DB-9 or DB-25 serial port on the maintenance terminal or PC to the V.24 (RS-232) console port on the EMU front panel (Figure 2-6).

Maintenance terminal or

PC with terminal emulation program

EMU-830

DB-9 or DB-25 serial port

RS-232 cable V.24 console port

Figure 2-6. Connecting a Maintenance Terminal or PC to the EMU-830 Console Port

2Configure the maintenance terminal (or PC) for the following communication settings:

•1200 to 19200 baud (19200 baud is recommended)

•No parity

•8 data bits

•1 stop bit

•Flow Control to None

•VT100 Emulation, or ANSI if VT100 is not available

•If your terminal supports a modem initialization string, it should be cleared

Note: If using a PC with the Microsoft Windows terminal emulation program, you must deselect both the Show Scroll Bars option and the Use Function, Arrow, and Ctrl Keys for Windows option in the Terminal Preferences menu (choose Settings Terminal Preferences to access the Terminal Preferences menu).

2-6 LTPE-UM-3159-02