ADC EMU-830 user manual Reset EMU, Inventory Information Screen

Chapter 3: Provisioning September 25, 2006

Reset EMU

In the Config menu, press R to display the "reset EMU" warning prompt (Figure 3-17).

Figure 3-17. Reset EMU Warning Prompt

IMPORTANT

If you reset the EMU-830, all alarm reporting information is lost.

Note: Resetting the EMU will log you off from the EMU console menu and requires that you log on again on to regain access.

Do one of the following:

•Press Y (yes) to reset the EMU (then log on to the EMU console menu if you wish to make configuration changes).

•Press N (no) to return to the Config menu.

Inventory Information Screen

Use the Æ arrow key to select Inventory, then press ENTER to display the Inventory Information screen (see Figure 3-18 on page 3-23). This is read-only screen providing information about the EMU-830. The data included in the Inventory Information screen is listed in Table 3-7 on page 3-23.

3-22 LTPE-UM-3159-02