Conceptronic C54NETCAM, Conceptronic, CNETCAM manual IPView SE control panel, How to Add a Camera

7.2.1. IPView SE control panel

Exit Minimize

					About
	Add Camera			Scan
System Config			Combine
		Play
Explanation of the Controls in the IPViewSE Control Panel.
- System Config	Configure the IPViewSE Control Panel
- Add Camera	To add a camera to IPView SE Control Panel
- Minimize	To minimize the control panel.
- Exit	To close IPView SE.
- Play	To play back the recorded file.
- Scan	To display for each camera one by one.
- Combine	To combine all display windows in one.
- About	To display the information of IPView SE.

7.2.2. How to Add a Camera

To add a new camera, click the Add Camera button. An Add Camera dialog box will appear as illustrated below:

You must select the camera and click the Add button to add a new camera.