Web Configuration Utility | Conceptronic Conceptronic, CNETCAM

6. Using the (Wireless) IP Camera through the webbrowser

You can access and manage the Wireless Internet Camera through:

1) a web browser, and 2) the enclosed software IPView SE.

This chapter describes the Web Configuration Utility, and provides the instructions on using the camera with a web browser.

6.1. Web Configuration Utility

The (Wireless) Internet Camera can be configured with the Setup Wizard, or through its built-in Web-based Configuration. ( Extensive knowledge of LAN will be helpful in setting up the Wireless Internet Camera.) From the web browser, enter the default IP address to access the Welcome screen of the (Wireless) Internet Camera.

To configure your (Wireless) Internet Camera, type http://192.168.0.20 in the address box. The number is the default IP address of your (Wireless) Internet Camera. Then, press [Enter].

NOTE: The computer’s IP address must correspond with the camera’s IP address in the same segment for the two devices to communicate.

Welcome Screen of the Configuration Utility

After the default IP address is entered from the browser, the Wireless Internet Camera Welcome screen will appear with a still image. There will be three options to choose from to set-up and view your Wireless Internet Camera, including:

View Video – ActiveX Mode View Video – Java Mode System Administration

6.2. System Administration

Under the Welcome screen of the Configuration Utility, click System Administration to enter the administration window that contains the settings required for the camera in the top menu bar, including Management, Configuration, Tools, Help, and Home.

HINT: Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon, or Refresh to reload the status. During the configuration, whenever you click Home in the top menu bar will make you return to the Welcome window.