6.4 System Administration Æ Configuration
The Configuration window contains commands for settings that are required to input key details to setup the camera for operation. Click Configuration in the top menu bar and the configuration window will appear as below:
6.4.1. System
Click the System item in the left column to setup the basic configuration of your camera.
- Camera Name: | This field is used to enter a descriptive name for the device. |
| The default setting for the Camera Name is |
| where xxxxxx is the last six digit of the MAC Address. The |
| maximum |
- Location: | length is 32 (printable ASCII). |
This field is used to enter a descriptive name for the location | |
- Admin: | used by the camera (optional). |
This field is used to enter the administrator name along with | |
| the password to access the System Administration settings. |
| Be sure to enter the password twice to confirm the details |
| once in the Admin Password field and again in the Confirm |
| Password |
| field. The default setting for administrator is empty, and you |
| need to key in the administrator name with a maximum |
| length of 12 (printable ASCII) characters and enter the |
| administrator password with a maximum length of 8 |