Conceptronic CNETCAM, Conceptronic, C54NETCAM manual Glossary of Terms

Page 40

9.7 Glossary of Terms

 

NUMBERS

10BASE-T

10BASE-T is Ethernet over UTP Category III,IV, or V unshielded

 

twisted-pair media.

100BASE-TX

The two-pair twisted-media implementation of 100BASE-T is called

 

100BASE-TX.

802.11g

An IEEE standard for wireless local area networks. It offers

 

transmissions speeds at up to 54 Mbps in the 2.4-GHz band.

 

A

Access point

It is the hardware interface between a wireless LAN and a wired LAN.

 

The access point attaches to the wired LAN through an Ethernet

 

connection.

Applet

Applets are small Java programs that can be embedded in an HTML

 

page. The rule at the moment is that an applet can only make an

 

Internet connection to the computer form that the applet was sent.

ASCII

American Standard Code For Information Interchange, it is the

 

standard method for encoding characters as 8-bit sequences of

 

binary numbers, allowing a maximum of 256 characters.

ARP

Address Resolution Protocol. ARP is a protocol that resides at the

 

TCP/IP Internet layer that delivers data on the same network by tran

 

slating an IP address to a physical address.

AVI

Audio Video Interleave, it is a Windows platform audio and video file

 

type, a common format for small movies and videos.

 

B

BOOTP

Bootstrap Protocol is an Internet protocol that can automatically

 

configure a ne twork device in a diskless workstation to give its own

 

IP address.

 

C

Communication

Communication has four components: sender, receiver, message,

 

and medium. In networks, devices and application tasks and

 

processes communicate messages to each other over media. They

 

represent the sender and receivers. The data they send is the

 

message. The cabling or transmission method they use is the

 

medium.

Connection

In networking, two devices establish a connection to communicate

 

with each other.

 

D

DHCP

Dynamic Host Configuration Protocol was developed by Microsoft a

 

protocol for assigning dynamic IP addresses to devices on a network.

 

With dynamic addressing, a device can have a different IP address

 

every time it connects to the network. In some systems, the device's

 

IP address can ev en change while it is still connected. DHCP also

 

suppor ts a mix of static and dynamic IP addresses. This simplifies

Image 40
Contents Conceptronic Table of Contents System Requirements Package ContentsExplanation of the controls Power and Link LED Network Cable ConnectorReset Button DC Power ConnectorHardware Installation Connecting the Ethernet cableAttaching the Power Supply Attaching the Camera to the StandWeb Configuration Utility Using the Wireless IP Camera through the webbrowserSystem Administration System Administration Æ Management SystemWireless Only for C54NETCAM VideoNetwork UserSystem Administration Æ Configuration Wireless Only for the C54NETCAM OFFSsid Mode. Select the appropriate channel from the list provided Network User DateTime Upload Mail FTP Server Test System Administration Æ ToolsMail Test Factory Reset ResetFirmware Upgrade System Administration Æ About BackupView Video ActiveX Mode View Image Java Mode Page Installation Using the Wireless IP Camera through the IPView SE UtilityGetting Started How to Add a Camera IPView SE control panelPage How to use a Camera Camera Preview Window Log Storage 1. Single HDD Reserve Space Camera ConfigureSplit Recording File Motion Detection Email Settings Adding your Wireless Internet Camera to your website Xplug Control Installation To WebserverConfigure the Wireless Internet Camera for Website Usage Router ConfigurationCamipaddress CamportWidth HeightFrequently Asked Questions Internet Camera FeaturesInternet Camera Installation AppendixTrouble Shooting Ping Your IP AddressPage Xplug Control Installation Adjust Internet Camera FocusInstallation To Web Server Installation To Local PCSpecification Glossary of Terms DNS HEXIeee ISPJava LANNAT NWay ProtocolPing PPPoERarp SmtpSnmp TCP/IPUTP WANWindows Workgroup