AXIS P7214/P7210 Installation Guide | Page 5 |
AXIS P7214/P7210 Video Encoder
Installation Guide
This installation guide provides instructions for installing a AXIS P7214/P7210 video encoder on your network. For all other aspects of using the product, please see the product’s User’s Manual, available on the CD included in this package, or from www.axis.com
Installation steps
Follow these steps to install the AXIS P7214/P7210 on your local network (LAN):
ENGLISH
1.Check the package contents against the list below.
2.Hardware overview. See page 6.
3.Install the hardware. See page 7.
4.Assign an IP address. See page 9.
5.Set the password. See page 12.
Package contents
Important!
This product must be used in compliance with local laws and regulations.
Item | Models/variants/notes |
|
|
Axis video encoder models | AXIS P7214 |
| AXIS P7210 |
|
|
Power adapter models | AXIS P7214: Type |
| AXIS P7210: Type |
|
|
Mounting kit | AXIS P7214 |
| • 4 screws and 4 plugs to mount the encoder to a concrete wall |
| AXIS P7210 |
| • 8 screws (for mounting with brackets) |
| • 4 M6x20 screws for mounting in rack |
| • 2 mounting brackets |
| AXIS P7214/P7210 |
| • 4 Surface protection pads |
| • Terminal block connectors (I/O: |
| 422: 2 x |
| AXIS P7210, Power: |
|
|
CD | AXIS Network Video Product CD, including product documentation, |
| installation tools and other software |
|
|
Printed Materials | AXIS P7214/P7210 Installation Guide (this document) |
| Axis Warranty Document |
|
|