Cabletron Systems SEHI-32/34 manual Checking Device Status and Updating Front Panel Info, Contact

Page 24

Using the SEHI Hub View

•Active Ports displays either YES or NO for any active (green) port, indicating whether or not that port has seen any traffic at all since the device was last initialized or the counters were last reset; this port display form can tell you whether any port whose statistics are not currently incrementing has seen some activity in the past. Non-green (presumably inactive) ports will display three dashes (---), regardless of their past statistical activity.

Checking Device Status and Updating Front Panel Info

The Device Status window (Figure 2-6) is where you change the information displayed on the Hub View Front Panel and where you can see summary information about the current state of the device.

To open the Device Status window:

1.Click on the Device button to display the Device menu.

2.Drag down to Status and release.

Figure 2-6. SEHI Device Status Window

Name and Location

These text fields help identify this SEHI-controlled HUBStack. The information you enter in the Name and Location boxes is written to the SEHI’s MIB and appears on the Hub View front panel.

Contact

Use the Contact box to record the name and phone number of the person responsible for the device. Note that the information entered here is not displayed on the Hub View front panel.

2-10

Monitoring Hub Performance

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Complete Networking Solution Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government onlyContents Chapter Repeater Redundancy Chapter Source AddressingChapter Security Appendix a Sehi MIB StructureUsing the Sehi User’s Guide Introduction to Spma For the SEHI-22/24 and SEHI-32/34Using the Sehi User’s Guide Conventions What’s not in the Sehi User’s GuideScreen Displays Introduction to Spma for the SEHI-22/24 and SEHI-32/34 Using the Mouse ButtonGetting Help FTPSehi Firmware Page Using the Sehi Hub View Using the Hub ViewNavigating Through the Hub View Hub View Front PanelUptime Date and TimeDevice Name LocationUsing the Sehi Hub View Using the Mouse in the Hub View Ports Display Hub View Port Color Codes Port Display FormMonitoring Hub Performance Errors Port Display FormLoad CollisionsFrame Sizes Port TypeChecking Device Status and Updating Front Panel Info Name and LocationContact Checking Module Status Chassis TypeName Checking Repeater Status Active UsersModule Type Checking Port Status Link StatusStatus Media TypeChecking Statistics Topology TypeReceived Bytes Total PacketsAvg Packet Size Broadcast PacketsTotal Errors Alignment ErrorsCRC Errors Multicast PacketsRunt Frames Giant FramesViewing the Port Source Address List ProtocolsManaging the Hub Setting the Polling Intervals Contact StatusEnabling/Disabling Ports Device General StatusDevice Configuration Port Operational StateUsing the Sehi Hub View Using the Sehi Hub View Managing the Hub What is a Segmentation Trap? Link/Seg TrapsWhat is a Link Trap? Enabling and Disabling Link/Seg TrapsFrom the icon From the command line stand-alone mode From the Hub ViewConfiguring Link/Seg Traps for the Repeater Viewing and Configuring Link/Seg Traps for Hub ModulesViewing and Configuring Link/Seg Traps for Ports Module Traps WindowPort Traps Window Setting Network Circuit Redundancy Repeater RedundancyConfiguring a Redundant Circuit Spmarun r4red IP address community nameChannel X Redundancy Window Add Circuit Address Window Monitoring Redundancy To set the Poll IntervalClick in the All Circuits box Source Addressing Displaying the Source Address ListDisplaying the Source Address List Source Addressing Setting the Hash Type Setting the Ageing TimeLocking Source Addresses Source Address Locking on Older Devices Configuring Source Address Traps Device-level Traps Module- and Port-level TrapsSource Addressing Source Addressing Finding a Source Address Port Source Address Traps WindowFind Source Address Window Click on to exit the window Source Addressing Finding a Source Address Security What is LANVIEWSECURE? Spmarun r4sec IP address SU community nameNew definitions for station and trunk ports Secure address assignmentTrunk port security Newest Lanviewsecure Features Continuous learning modeConfigurable violation response Full or partial security against eavesdroppingLearned addresses reset Security on Non-LANVIEWSECUREHubsForced non-secure status Configuring Security Security To assign secure addresses to a port Addresses Window Resetting Learned Addresses Add MAC Address WindowTips for Successfully Implementing Eavesdropper Protection Enabling Security and Traps Repeater-level Security and Traps Hub-level Security and Traps Channel a Security WindowPort-level Security and Traps Channel a Module Security WindowChannel a Port Security Window Security Security Enabling Security and Traps Ietf MIB Support Sehi MIB StructureSehi Chassis MGR Sehi Host Services Sehi IP ServicesBrief Word About MIB Components and Community Names Repeater OneSehi MIB Structure Sehi MIB Structure Index Index-2 Index-3 Index Index-4

SEHI-22/24, SEHI-32/34 specifications

Cabletron Systems was a notable player in the networking hardware market during the rise of local area networks (LANs) in the late 20th century. Among its innovative products were the SEHI-22/24 and SEHI-32/34 modules, which were designed to enhance network capabilities in enterprise environments.

The SEHI-22/24 and SEHI-32/34 were versatile high-performance Ethernet switch modules that offered significant advantages in network management and connectivity. These modules were designed to work with Cabletron's modular switching and routing architecture, allowing for scalable solutions tailored to specific network demands. A key feature of the SEHI series was its support for a range of Ethernet standards, ensuring compatibility with diverse networking environments.

One notable characteristic of the SEHI-22/24 was its ability to support both 10Base-T and 100Base-TX Ethernet technologies. This dual support enabled organizations to leverage existing 10 Mbps infrastructure while facilitating upgrades to 100 Mbps speeds without needing a complete overhaul of the network. Similarly, the SEHI-32/34 offered even greater connectivity options, accommodating more users and devices while maintaining high throughput and low latency.

In terms of management features, the SEHI series was equipped with extensive traffic management capabilities, including Quality of Service (QoS) features that prioritized bandwidth for critical applications. This ensured that essential services such as voice over IP (VoIP) and video conferencing could function optimally, even during heavy network loads.

Furthermore, both modules featured advanced diagnostics and monitoring tools that provided network administrators with critical insights into traffic patterns and potential bottlenecks. This functionality was essential for maintaining network health and optimizing performance, especially in dynamic business environments.

Security also played a crucial role in the design of the SEHI-22/24 and SEHI-32/34. The modules incorporated support for various authentication methods and access controls, ensuring that sensitive data remained protected within the corporate network.

In summary, Cabletron Systems’ SEHI-22/24 and SEHI-32/34 offered significant advancements in Ethernet switching technology, allowing organizations to build robust, scalable, and secure networks. With their impressive features, compatibility, and capacity for management and security, these modules were instrumental in shaping reliable networking solutions for enterprises navigating the rapidly evolving digital landscape.
Top Page Image Contents