Cabletron Systems SEHI-32/34, SEHI-22/24 manual Displaying the Source Address List

Page 52

Source Addressing

NOTES

The spmarun script invoked first in the above command temporarily sets the environment variables SPMA needs to operate; be sure to use this command any time you launch an application from the command line. This script is automatically invoked when you launch an application from the icon menu or from within the Hub View.

If you wish to change any Source Address settings, be sure to use a community name with at least Read/Write access. If you only wish to view current settings, a community name with Read access will be sufficient. If you wish to lock or unlock ports, you must use a community name with SuperUser access.

If there is a hostname mapped to your SEHI’s IP address, you can use <hostname> in place of <IP address> to launch this application. Please note, however, that the hostname is not the same as the device name which can be assigned via Local Management and/or SPMA; you cannot use the device name in place of the IP address.

The Repeater Source Address window, Figure 5-1, will appear.

Figure 5-1. The Repeater Source Address Window

The Repeater Source Address window provides a list of the repeater interfaces available on the SEHI, as well as command buttons that allow you to display the Source Address List and enable and disable module and port source addressing traps.

NOTE

The ability to enable or disable source addressing traps at the module and port level is not available in all versions of repeater device firmware; if the Module Trap and Port Trap buttons are grayed out, these features are not available on your device. Contact Cabletron Systems Technical Support for more information on upgrading your device firmware.

To view the source address list for the device, highlight the interface for which

you wish to view the SAT, then click mouse button 1 on ; the Source Address List window, Figure 5-2, will appear.

5-2

Displaying the Source Address List

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Complete Networking Solution Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government onlyContents Chapter Repeater Redundancy Chapter Source AddressingChapter Security Appendix a Sehi MIB StructureUsing the Sehi User’s Guide Introduction to Spma For the SEHI-22/24 and SEHI-32/34Using the Sehi User’s Guide What’s not in the Sehi User’s Guide ConventionsScreen Displays Introduction to Spma for the SEHI-22/24 and SEHI-32/34 Using the Mouse ButtonGetting Help FTPSehi Firmware Page Using the Sehi Hub View Using the Hub ViewNavigating Through the Hub View Hub View Front PanelUptime Date and TimeDevice Name LocationUsing the Sehi Hub View Using the Mouse in the Hub View Ports Display Hub View Port Color Codes Port Display FormMonitoring Hub Performance Errors Port Display FormLoad CollisionsFrame Sizes Port TypeName and Location Checking Device Status and Updating Front Panel InfoContact Chassis Type Checking Module StatusName Active Users Checking Repeater StatusModule Type Checking Port Status Link StatusStatus Media TypeChecking Statistics Topology TypeReceived Bytes Total PacketsAvg Packet Size Broadcast PacketsTotal Errors Alignment ErrorsCRC Errors Multicast PacketsRunt Frames Giant FramesViewing the Port Source Address List ProtocolsManaging the Hub Setting the Polling Intervals Contact StatusEnabling/Disabling Ports Device General StatusDevice Configuration Port Operational StateUsing the Sehi Hub View Using the Sehi Hub View Managing the Hub What is a Segmentation Trap? Link/Seg TrapsEnabling and Disabling Link/Seg Traps What is a Link Trap?From the icon From the command line stand-alone mode From the Hub ViewConfiguring Link/Seg Traps for the Repeater Viewing and Configuring Link/Seg Traps for Hub ModulesViewing and Configuring Link/Seg Traps for Ports Module Traps WindowPort Traps Window Setting Network Circuit Redundancy Repeater RedundancyConfiguring a Redundant Circuit Spmarun r4red IP address community nameChannel X Redundancy Window Add Circuit Address Window Monitoring Redundancy To set the Poll IntervalClick in the All Circuits box Source Addressing Displaying the Source Address ListDisplaying the Source Address List Source Addressing Setting the Hash Type Setting the Ageing TimeLocking Source Addresses Source Address Locking on Older Devices Configuring Source Address Traps Device-level Traps Module- and Port-level TrapsSource Addressing Source Addressing Finding a Source Address Port Source Address Traps WindowFind Source Address Window Click on to exit the window Source Addressing Finding a Source Address Security What is LANVIEWSECURE? Spmarun r4sec IP address SU community nameSecure address assignment New definitions for station and trunk portsTrunk port security Newest Lanviewsecure Features Continuous learning modeConfigurable violation response Full or partial security against eavesdroppingSecurity on Non-LANVIEWSECUREHubs Learned addresses resetForced non-secure status Configuring Security Security To assign secure addresses to a port Addresses Window Resetting Learned Addresses Add MAC Address WindowTips for Successfully Implementing Eavesdropper Protection Enabling Security and Traps Repeater-level Security and Traps Hub-level Security and Traps Channel a Security WindowPort-level Security and Traps Channel a Module Security WindowChannel a Port Security Window Security Security Enabling Security and Traps Sehi MIB Structure Ietf MIB SupportSehi Chassis MGR Sehi Host Services Sehi IP ServicesBrief Word About MIB Components and Community Names Repeater OneSehi MIB Structure Sehi MIB Structure Index Index-2 Index-3 Index Index-4

SEHI-22/24, SEHI-32/34 specifications

Cabletron Systems was a notable player in the networking hardware market during the rise of local area networks (LANs) in the late 20th century. Among its innovative products were the SEHI-22/24 and SEHI-32/34 modules, which were designed to enhance network capabilities in enterprise environments.

The SEHI-22/24 and SEHI-32/34 were versatile high-performance Ethernet switch modules that offered significant advantages in network management and connectivity. These modules were designed to work with Cabletron's modular switching and routing architecture, allowing for scalable solutions tailored to specific network demands. A key feature of the SEHI series was its support for a range of Ethernet standards, ensuring compatibility with diverse networking environments.

One notable characteristic of the SEHI-22/24 was its ability to support both 10Base-T and 100Base-TX Ethernet technologies. This dual support enabled organizations to leverage existing 10 Mbps infrastructure while facilitating upgrades to 100 Mbps speeds without needing a complete overhaul of the network. Similarly, the SEHI-32/34 offered even greater connectivity options, accommodating more users and devices while maintaining high throughput and low latency.

In terms of management features, the SEHI series was equipped with extensive traffic management capabilities, including Quality of Service (QoS) features that prioritized bandwidth for critical applications. This ensured that essential services such as voice over IP (VoIP) and video conferencing could function optimally, even during heavy network loads.

Furthermore, both modules featured advanced diagnostics and monitoring tools that provided network administrators with critical insights into traffic patterns and potential bottlenecks. This functionality was essential for maintaining network health and optimizing performance, especially in dynamic business environments.

Security also played a crucial role in the design of the SEHI-22/24 and SEHI-32/34. The modules incorporated support for various authentication methods and access controls, ensuring that sensitive data remained protected within the corporate network.

In summary, Cabletron Systems’ SEHI-22/24 and SEHI-32/34 offered significant advancements in Ethernet switching technology, allowing organizations to build robust, scalable, and secure networks. With their impressive features, compatibility, and capacity for management and security, these modules were instrumental in shaping reliable networking solutions for enterprises navigating the rapidly evolving digital landscape.
Top Page Image Contents