Cabletron Systems SEHI-22/24, SEHI-32/34 Uptime, Date and Time, Device Name, Location, IP Address

Page 17

Using the SEHI Hub View

Uptime

The time that the device has been running without interruption. The counter resets to 0 days 00:00:00 (X days HH:MM:SS) when one of the following occurs:

•Power to the device is cycled.

•The device is reset manually.

Date and Time

The date and time are taken from the device’s internal clock.

Device Name

A text field that you can use to help identify the device.

Location

A text field that you can use to help identify the device.

NOTE

If you have assigned a device name or location that contains more than 19 characters, only the last 19 will be displayed in the Hub View. Check the Device Status window for the complete name and/or location, if necessary.

IP Address

The device’s Internet Protocol address. You cannot change the SEHI’s IP address from SPMA.

MAC Address

The device’s factory-set hardware address. The MAC address cannot be changed.

Using the Hub View

2-3

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Complete Networking Solution Page Virus Disclaimer Applicable to licenses to the United States Government only Restricted Rights NoticeContents Chapter Source Addressing Chapter Repeater RedundancyChapter Security Appendix a Sehi MIB StructureIntroduction to Spma For the SEHI-22/24 and SEHI-32/34 Using the Sehi User’s GuideUsing the Sehi User’s Guide Screen Displays ConventionsWhat’s not in the Sehi User’s Guide Introduction to Spma for the SEHI-22/24 and SEHI-32/34 Button Using the MouseFTP Getting HelpSehi Firmware Page Using the Hub View Using the Sehi Hub ViewHub View Front Panel Navigating Through the Hub ViewDate and Time UptimeDevice Name LocationUsing the Sehi Hub View Using the Mouse in the Hub View Ports Display Port Display Form Hub View Port Color CodesMonitoring Hub Performance Port Display Form ErrorsLoad CollisionsPort Type Frame SizesContact Checking Device Status and Updating Front Panel InfoName and Location Name Checking Module StatusChassis Type Module Type Checking Repeater StatusActive Users Link Status Checking Port StatusMedia Type StatusTopology Type Checking StatisticsTotal Packets Received BytesAvg Packet Size Broadcast PacketsAlignment Errors Total ErrorsCRC Errors Multicast PacketsGiant Frames Runt FramesProtocols Viewing the Port Source Address ListManaging the Hub Contact Status Setting the Polling IntervalsDevice General Status Enabling/Disabling PortsDevice Configuration Port Operational StateUsing the Sehi Hub View Using the Sehi Hub View Managing the Hub Link/Seg Traps What is a Segmentation Trap?From the icon What is a Link Trap?Enabling and Disabling Link/Seg Traps From the Hub View From the command line stand-alone modeViewing and Configuring Link/Seg Traps for Hub Modules Configuring Link/Seg Traps for the RepeaterModule Traps Window Viewing and Configuring Link/Seg Traps for PortsPort Traps Window Repeater Redundancy Setting Network Circuit RedundancySpmarun r4red IP address community name Configuring a Redundant CircuitChannel X Redundancy Window Add Circuit Address Window To set the Poll Interval Monitoring RedundancyClick in the All Circuits box Displaying the Source Address List Source AddressingDisplaying the Source Address List Source Addressing Setting the Ageing Time Setting the Hash TypeLocking Source Addresses Source Address Locking on Older Devices Configuring Source Address Traps Module- and Port-level Traps Device-level TrapsSource Addressing Source Addressing Port Source Address Traps Window Finding a Source AddressFind Source Address Window Click on to exit the window Source Addressing Finding a Source Address Security Spmarun r4sec IP address SU community name What is LANVIEWSECURE?Trunk port security New definitions for station and trunk portsSecure address assignment Continuous learning mode Newest Lanviewsecure FeaturesConfigurable violation response Full or partial security against eavesdroppingForced non-secure status Learned addresses resetSecurity on Non-LANVIEWSECUREHubs Configuring Security Security To assign secure addresses to a port Addresses Window Add MAC Address Window Resetting Learned AddressesTips for Successfully Implementing Eavesdropper Protection Enabling Security and Traps Repeater-level Security and Traps Channel a Security Window Hub-level Security and TrapsChannel a Module Security Window Port-level Security and TrapsChannel a Port Security Window Security Security Enabling Security and Traps Sehi Chassis MGR Ietf MIB SupportSehi MIB Structure Sehi IP Services Sehi Host ServicesBrief Word About MIB Components and Community Names Repeater OneSehi MIB Structure Sehi MIB Structure Index Index-2 Index-3 Index Index-4

SEHI-22/24, SEHI-32/34 specifications

Cabletron Systems was a notable player in the networking hardware market during the rise of local area networks (LANs) in the late 20th century. Among its innovative products were the SEHI-22/24 and SEHI-32/34 modules, which were designed to enhance network capabilities in enterprise environments.

The SEHI-22/24 and SEHI-32/34 were versatile high-performance Ethernet switch modules that offered significant advantages in network management and connectivity. These modules were designed to work with Cabletron's modular switching and routing architecture, allowing for scalable solutions tailored to specific network demands. A key feature of the SEHI series was its support for a range of Ethernet standards, ensuring compatibility with diverse networking environments.

One notable characteristic of the SEHI-22/24 was its ability to support both 10Base-T and 100Base-TX Ethernet technologies. This dual support enabled organizations to leverage existing 10 Mbps infrastructure while facilitating upgrades to 100 Mbps speeds without needing a complete overhaul of the network. Similarly, the SEHI-32/34 offered even greater connectivity options, accommodating more users and devices while maintaining high throughput and low latency.

In terms of management features, the SEHI series was equipped with extensive traffic management capabilities, including Quality of Service (QoS) features that prioritized bandwidth for critical applications. This ensured that essential services such as voice over IP (VoIP) and video conferencing could function optimally, even during heavy network loads.

Furthermore, both modules featured advanced diagnostics and monitoring tools that provided network administrators with critical insights into traffic patterns and potential bottlenecks. This functionality was essential for maintaining network health and optimizing performance, especially in dynamic business environments.

Security also played a crucial role in the design of the SEHI-22/24 and SEHI-32/34. The modules incorporated support for various authentication methods and access controls, ensuring that sensitive data remained protected within the corporate network.

In summary, Cabletron Systems’ SEHI-22/24 and SEHI-32/34 offered significant advancements in Ethernet switching technology, allowing organizations to build robust, scalable, and secure networks. With their impressive features, compatibility, and capacity for management and security, these modules were instrumental in shaping reliable networking solutions for enterprises navigating the rapidly evolving digital landscape.
Top Page Image Contents