Cabletron Systems SEHI-32/34, SEHI-22/24 manual Source Addressing

Page 60

Source Addressing

Figure 5-3. The Module Source Address Traps Window

To enable or disable port-level traps:

1.In the Port Source Address Traps window (Figure 5-4, page 5-11), click mouse button 1 to select the port or ports for which you wish to enable or disable traps. If the Set Trap Status For field displaysSelected Ports (the default setting), you can click to select any ports; to de-select any highlighted port, click on it again. If the selection All Ports On Module is displayed in the Set Traps Status For field, you can select only one port at a time; trap status will be set for all ports on the same module as the selected port. If the selection All Ports on Repeater is displayed in the Set Trap Status For field, all available ports will be automatically selected; if you de-select any port, the Set Trap Status For field will automatically revert to theSelected Ports setting. To change the setting in the Set Trap Status For field, click mouse button 1 on the currently displayed setting, and drag down to select a new setting.

5-10

Configuring Source Address Traps

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Complete Networking Solution Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government onlyContents Chapter Repeater Redundancy Chapter Source AddressingChapter Security Appendix a Sehi MIB StructureUsing the Sehi User’s Guide Introduction to Spma For the SEHI-22/24 and SEHI-32/34Using the Sehi User’s Guide Conventions What’s not in the Sehi User’s GuideScreen Displays Introduction to Spma for the SEHI-22/24 and SEHI-32/34 Using the Mouse ButtonGetting Help FTPSehi Firmware Page Using the Sehi Hub View Using the Hub ViewNavigating Through the Hub View Hub View Front PanelUptime Date and TimeDevice Name LocationUsing the Sehi Hub View Using the Mouse in the Hub View Ports Display Hub View Port Color Codes Port Display FormMonitoring Hub Performance Errors Port Display FormLoad CollisionsFrame Sizes Port TypeChecking Device Status and Updating Front Panel Info Name and LocationContact Checking Module Status Chassis TypeName Checking Repeater Status Active UsersModule Type Checking Port Status Link StatusStatus Media TypeChecking Statistics Topology TypeReceived Bytes Total PacketsAvg Packet Size Broadcast PacketsTotal Errors Alignment ErrorsCRC Errors Multicast PacketsRunt Frames Giant FramesViewing the Port Source Address List ProtocolsManaging the Hub Setting the Polling Intervals Contact StatusEnabling/Disabling Ports Device General StatusDevice Configuration Port Operational StateUsing the Sehi Hub View Using the Sehi Hub View Managing the Hub What is a Segmentation Trap? Link/Seg TrapsWhat is a Link Trap? Enabling and Disabling Link/Seg TrapsFrom the icon From the command line stand-alone mode From the Hub ViewConfiguring Link/Seg Traps for the Repeater Viewing and Configuring Link/Seg Traps for Hub ModulesViewing and Configuring Link/Seg Traps for Ports Module Traps WindowPort Traps Window Setting Network Circuit Redundancy Repeater RedundancyConfiguring a Redundant Circuit Spmarun r4red IP address community nameChannel X Redundancy Window Add Circuit Address Window Monitoring Redundancy To set the Poll IntervalClick in the All Circuits box Source Addressing Displaying the Source Address ListDisplaying the Source Address List Source Addressing Setting the Hash Type Setting the Ageing TimeLocking Source Addresses Source Address Locking on Older Devices Configuring Source Address Traps Device-level Traps Module- and Port-level TrapsSource Addressing Source Addressing Finding a Source Address Port Source Address Traps WindowFind Source Address Window Click on to exit the window Source Addressing Finding a Source Address Security What is LANVIEWSECURE? Spmarun r4sec IP address SU community nameNew definitions for station and trunk ports Secure address assignmentTrunk port security Newest Lanviewsecure Features Continuous learning modeConfigurable violation response Full or partial security against eavesdroppingLearned addresses reset Security on Non-LANVIEWSECUREHubsForced non-secure status Configuring Security Security To assign secure addresses to a port Addresses Window Resetting Learned Addresses Add MAC Address WindowTips for Successfully Implementing Eavesdropper Protection Enabling Security and Traps Repeater-level Security and Traps Hub-level Security and Traps Channel a Security WindowPort-level Security and Traps Channel a Module Security WindowChannel a Port Security Window Security Security Enabling Security and Traps Ietf MIB Support Sehi MIB StructureSehi Chassis MGR Sehi Host Services Sehi IP ServicesBrief Word About MIB Components and Community Names Repeater OneSehi MIB Structure Sehi MIB Structure Index Index-2 Index-3 Index Index-4

SEHI-22/24, SEHI-32/34 specifications

Cabletron Systems was a notable player in the networking hardware market during the rise of local area networks (LANs) in the late 20th century. Among its innovative products were the SEHI-22/24 and SEHI-32/34 modules, which were designed to enhance network capabilities in enterprise environments.

The SEHI-22/24 and SEHI-32/34 were versatile high-performance Ethernet switch modules that offered significant advantages in network management and connectivity. These modules were designed to work with Cabletron's modular switching and routing architecture, allowing for scalable solutions tailored to specific network demands. A key feature of the SEHI series was its support for a range of Ethernet standards, ensuring compatibility with diverse networking environments.

One notable characteristic of the SEHI-22/24 was its ability to support both 10Base-T and 100Base-TX Ethernet technologies. This dual support enabled organizations to leverage existing 10 Mbps infrastructure while facilitating upgrades to 100 Mbps speeds without needing a complete overhaul of the network. Similarly, the SEHI-32/34 offered even greater connectivity options, accommodating more users and devices while maintaining high throughput and low latency.

In terms of management features, the SEHI series was equipped with extensive traffic management capabilities, including Quality of Service (QoS) features that prioritized bandwidth for critical applications. This ensured that essential services such as voice over IP (VoIP) and video conferencing could function optimally, even during heavy network loads.

Furthermore, both modules featured advanced diagnostics and monitoring tools that provided network administrators with critical insights into traffic patterns and potential bottlenecks. This functionality was essential for maintaining network health and optimizing performance, especially in dynamic business environments.

Security also played a crucial role in the design of the SEHI-22/24 and SEHI-32/34. The modules incorporated support for various authentication methods and access controls, ensuring that sensitive data remained protected within the corporate network.

In summary, Cabletron Systems’ SEHI-22/24 and SEHI-32/34 offered significant advancements in Ethernet switching technology, allowing organizations to build robust, scalable, and secure networks. With their impressive features, compatibility, and capacity for management and security, these modules were instrumental in shaping reliable networking solutions for enterprises navigating the rapidly evolving digital landscape.
Top Page Image Contents