REMOTE UNIT CONFIGURATION & OPERATION
4.3Other Remote Configuration & Operation Options
Keyboard ‘hot’ keys are used to carry out various functions on both Remote and Local Units.
To enter these commands:
1.Press and release the initial ‘hot’ key.
By default, the initial ‘hot’ key is <Right Control>
2.Press and release the command key.
Changing the Initial Hot Key
The initial ‘hot’ key for both Remote and Local Units may be changed from <Right Control> to <Left Control> using a DIP switch on the Remote Unit’s main circuit board (see Figure 10).
Power | Mouse K’board | Video |
SW1 DIP switches
| RJ45 | Brightness Focus | |
DIP Switch settings | OFF | ON | |
|
| ||
Not used |
|
|
|
Initial Hot Key | Right Control |
| Left |
Control |
|
|
|
Not used |
|
|
|
Not used |
|
|
|
Figure 10 | Remote Unit DIP switches on Audio/Serial/Switching | ||
| CAT5/5e KVM Extenders |
|
|
31