Cisco Systems UBR7100E manual LED Label Color State Function, Sys Rdy

Chapter 1 Product Overview

Functional Overview

Table 1-5 Cisco uBR7100 Series System LED Descriptions

LED Label	Color	State	Function
ACT 0	Green	On	10BASE-T/100BASE-TX Ethernet ports are transmitting or receiving packets (activity).
ACT 1
LNK 0	Green	On	10BASE-T/100BASE-TX Ethernet ports have established a valid link with the network.
LNK 1			This LED remains off during normal operation of the router, unless there is an incoming
			carrier signal.
SLOT 0	Green	On	The PCMCIA card slot (0 or 1) is in use and is being accessed by the system. These LEDs
SLOT 1			remain off during normal operation of the router.
PWR	Green	On	The power supply is delivering AC-input power to the router.
SYS RDY	Green	On	The system is operational and has passed its initial power-on diagnostics.
EN	Green	On	The cable interface card is on, receiving power from the router midplane, and enabled for
			operation. This LED remains on during normal operation of the router.
DS0 RF	Green	On	The RF downstream interface and the integrated upconverter are active.
DS0	Green	On	The IF downstream interface is active.
US0–US3	Green	On	The associated upstream interface is active.

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

OL-5916-01 1-19