Cisco Systems UBR7100 System Specifications, Physical Specifications, Description Specification

A P P E N D I X A

System Specifications

This appendix provides the following specifications for the Cisco uBR7100 series universal broadband routers:

•Physical Specifications, page A-1

•RF Specifications, page A-3

•DOCSIS Upstream and Downstream Specifications, page A-3

•EuroDOCSIS Upstream and Downstream Specifications, page A-5

Physical Specifications

Table A-1 Physical Specifications and Power Requirements

	Description	Specification
	Dimensions (H x W x D)	3.5 x 17.5 x 18.25 in. (8.89 x 44.45 x 46.36 cm)
	Weight	~ 32 lb (14.5 kg)
	Heat dissipation	370 W (1262 Btu1)
	Input voltage, AC power	100 to 240 VAC
	supply	5 to 2.5 A2
	Current	50/60 Hz
	Frequency	0.80 to 0.95
	Power factor	525 W3 (maximum)
	Input AC power
	AC-input cables	18-QEG4 3-wire cable, with a 3-lead IEC-320 receptacle on the power
		supply end, and a country-dependent plug on the power source end
	Airflow	~120 cfm4
	Temperature	32 to 104°F (0 to 40°C) operating; –4 to 149°F (–20 to 65°C)
		nonoperating
	Humidity	10 to 90% noncondensing
	LAN interfaces	2 Ethernet 10BASE-T/100BASE-TX autosensing (RJ-45)
	Console port	Asynchronous serial (RJ-45)
	Auxiliary port	Asynchronous serial (RJ-45) with hardware flow-control
	Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01			A-1