Lathem 7000E manual

Page 16

You can reset the card without removing the cover when the time recorder is used under the following condition.

The Job Cost Mode and also the card "Reset" setting is YES.

Refer to "Job Cost Mode" in "Setting the Mode".

In order to reset the card, you must push the right-side button (Reset button) and then insert the card.

After printing "RESET", the card shall be ejected.

Reset button

Note: If the last punch was IN, you must insert the card twice.

A fully used card can also be reset by this operation, but without printing the word "RESET".

13

Image 16

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions SignsDaily Care Features Accessories FeaturesInstalling Ribbon Cassette Precautions to take when replacing the ribbon Mounting Unit on Wall Environmental ConditionsDaily Operations Disabled Functions for the buttonsRequired OptionalCard reassign All cards reset Card reset Page What YOU can do with 7000E OUT Total Setting Preparation for settingSetting the Display Hours Setting the Time ExampleSetting the Date Payroll Mode Setting the ModeSet the Mode Set the Starting day of the week Set the Starting dateSet the 1st starting date Set the 2nd starting dateJob Cost Mode Set the card ResetSetting the Print Format Set the Date/D.O.W. print formatSet the Hour print format Set the Minute print format for totals onlySet the Types of rounding Setting the RoundingSet the Rounding unit Setting the Auto Break Deduction Set the Elapsed timeSet the Max In Override Setting the MaxSet the Max In Value Setting the Button Function Setting the Daylight Saving Time Daylight saving time functionYear Month Date Mark means Starting date setting Set the ending date SETDeleting the daylight saving time settings Setting the Print Language Resetting Print Example Installing Ni-Cd Battery Optional Troubleshooting Error No. appearsSpecifications Manufacturers Warranty Form No. OM7E0209 Q0132-6120