Lathem 7000E manual Setting the Display Hours

Page 20

Setting the Display Hours

DISPLAY

HOURS

DATE / TIME

CHANGE

SET

Type of hour

1AM/PM (12hour)

224 hour

1 Push the DATE/TIME button for 3 seconds and position the " " under the "DISPLAY HOURS" mark.

2 Push the CHANGE button to select either "AM/PM" or "24 hour". For example, set 1 if AM/PM hour is desired.

DISPLAY

HOURS

DATE / TIME

3 Push the SET button to finish the setting. At that moment, the display will change from flashing to steady, and the setting is now completed.

CHANGE SET

4 Push the SET button once again.

17

Image 20

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions SignsDaily Care Features Accessories FeaturesInstalling Ribbon Cassette Precautions to take when replacing the ribbon Mounting Unit on Wall Environmental ConditionsDaily Operations Disabled Functions for the buttonsRequired OptionalCard reassign All cards reset Card reset Page What YOU can do with 7000E OUT Total Setting Preparation for settingSetting the Display Hours Setting the Time ExampleSetting the Date Set the Mode Setting the ModePayroll Mode Set the Starting day of the week Set the Starting dateSet the 1st starting date Set the 2nd starting dateJob Cost Mode Set the card ResetSetting the Print Format Set the Date/D.O.W. print formatSet the Hour print format Set the Minute print format for totals onlySet the Rounding unit Setting the RoundingSet the Types of rounding Setting the Auto Break Deduction Set the Elapsed timeSet the Max In Value Setting the MaxSet the Max In Override Setting the Button Function Setting the Daylight Saving Time Daylight saving time functionYear Month Date Mark means Starting date setting Set the ending date SETDeleting the daylight saving time settings Setting the Print Language Resetting Print Example Installing Ni-Cd Battery Optional Troubleshooting Error No. appearsSpecifications Manufacturers Warranty Form No. OM7E0209 Q0132-6120