Lathem 7000E manual Setting the Auto Break Deduction, Set the Elapsed time

Setting the Auto Break Deduction

Refer to "WHAT YOU CAN DO WITH THE 7000E" before setting.

If error " E-49 " appears when you try to change settings, then you must reset all cards before proceeding. ( See "All cards reset" )

Example
Elapsed time -----	8 hours	Break duration -----	60 min.

AUTO BREAK DEDUCTION

Order Option

1Elapsed time

2Break duration

FUNCTION

CHANGE

SET

1 Push the

FUNCTION

button for 3

seconds.

2 Push the

button and

FUNCTION

Elapsed time

position the " " under the "AUTO

Hour

BREAK DEDUCTION" mark.

setting

AUTO BREAK

Set the "Elapsed time".

DEDUCTION

3 Push the

button. At that moment, the

SET

flashing changes to "Hour". In the case of

FUNCTION

CHANGE

SET

the example, push the

CHANGE

button to

set at "8" and then push the

button. At

AUTO BREAK

SET

DEDUCTION

Minute

that moment, the flashing of the display

will change from "Hour" to "Minute".

4 In this case, push the CHANGE

FUNCTION CHANGE SETbutton to set at "00". And then push the SET button.

Break duration

settingAUTO BREAK DEDUCTION

FUNCTION CHANGE SET

Set the "Break duration".

5 Push the CHANGE button twice to set the left-side number at "2" and then push the SET button. At that moment, the flashing of the display will change to "Minute".

		6 In this case, push the				button to
AUTO BREAK				CHANGE
DEDUCTION	Minute
			set at "60". And then push the		SET		button.
			Range of value: 1 - 90 min.

FUNCTION CHANGE

SET

7 Push the SET button once again.

27