Lathem 7000E manual Setting the Max, Set the Max In Override, Set the Max In Value

Page 31

Setting the Max In

Refer to "WHAT YOU CAN DO WITH THE 7000E" before setting.

You can set the "Max In Value" and "Max In Override".

If error " E-49 " appears when you try to change settings, then you must reset all cards before proceeding. ( See "All cards reset" )

Example
Max In Override -----	No Max In Value -----	17 hours

MAX IN

FUNCTION CHANGE SET

1 Push the FUNCTION button for 3 seconds.

2 Push the FUNCTION button and position the " " under the "MAX IN" mark.

Max in override

MAX IN

FUNCTION CHANGE SET

Max in Value (Hour)

MAX IN

FUNCTION CHANGE SET

Set the "Max In Override".

Order Option

1No

2Yes

3 In the case of the example, push the CHANGE button to set the left-side number at "1" and then push the SET button. At that moment, the flashing of the display will change to the right-side number.

Set the "Max In Value".

4 In this case, push the CHANGE button to set at "17". And then push the SET button.

Range of value: 1 - 24 hours

5 Push the SET button once again.

28

Image 31

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Signs PrecautionsDaily Care Features Features AccessoriesInstalling Ribbon Cassette Precautions to take when replacing the ribbon Environmental Conditions Mounting Unit on WallDaily Operations Optional DisabledFunctions for the buttons RequiredCard reassign All cards reset Card reset Page What YOU can do with 7000E OUT Total Preparation for setting SettingSetting the Display Hours Example Setting the TimeSetting the Date Payroll Mode Setting the ModeSet the Mode Set the Starting date Set the Starting day of the weekSet the 2nd starting date Set the 1st starting dateSet the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSet the Types of rounding Setting the RoundingSet the Rounding unit Set the Elapsed time Setting the Auto Break DeductionSet the Max In Override Setting the MaxSet the Max In Value Setting the Button Function Daylight saving time function Setting the Daylight Saving TimeYear Month Date Mark means Starting date setting SET Set the ending dateDeleting the daylight saving time settings Setting the Print Language Resetting Print Example Installing Ni-Cd Battery Optional Error No. appears TroubleshootingSpecifications Manufacturers Warranty Form No. OM7E0209 Q0132-6120