Lathem 7000E manual Set the 1st starting date, Set the 2nd starting date

Page 25

Example 3

Semimonthly closing in Payroll Mode ----- the starting dates are 1st and 16th.

MODE

FUNCTION CHANGE SET

Semimonthly

closing

MODE

FUNCTION CHANGE SET

1st starting

date

MODE

FUNCTION CHANGE SET

2nd starting

date

MODE

1 Push the FUNCTION button for 3 seconds and position the "" under the "MODE" mark.

Set the "Mode".

2 In the case of semimonthly closing, push the CHANGE button to set the left-side number at "4" and then push the SET button. At that moment, the flashing of the display will change to the middle number.

Set the "1st starting date".

3 To set pay period, you have to input

a starting date. In this case, the 1st starting date is 1st. Push the CHANGE button to set at "1" and then push the SET button. At that moment, the flashing of the display will change to the right-side number.

Set the "2nd starting date".

FUNCTION CHANGE

SET

4 In this case, the 2nd starting date is 16th. Push the CHANGE button to set at "16" and then push the SET button.

5 Push the SET button once again.

22

Image 25

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Signs PrecautionsDaily Care Features Features AccessoriesInstalling Ribbon Cassette Precautions to take when replacing the ribbon Environmental Conditions Mounting Unit on WallDaily Operations Functions for the buttons DisabledRequired OptionalCard reassign All cards reset Card reset Page What YOU can do with 7000E OUT Total Preparation for setting SettingSetting the Display Hours Example Setting the Time Setting the Date Payroll Mode Setting the ModeSet the Mode Set the Starting date Set the Starting day of the weekSet the 2nd starting date Set the 1st starting dateSet the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSet the Types of rounding Setting the RoundingSet the Rounding unit Set the Elapsed time Setting the Auto Break DeductionSet the Max In Override Setting the MaxSet the Max In Value Setting the Button Function Daylight saving time function Setting the Daylight Saving TimeYear Month Date Mark means Starting date setting SET Set the ending dateDeleting the daylight saving time settings Setting the Print Language Resetting Print Example Installing Ni-Cd Battery Optional Error No. appears TroubleshootingSpecifications Manufacturers Warranty Form No. OM7E0209 Q0132-6120