Lathem 7000E manual Mounting Unit on Wall, Environmental Conditions

Page 10

Mounting Unit on Wall

The unit can be mounted on a wall using the supplied mounting fittings. To mount the unit on a wall, take the following steps:

1 Install wall mount screws (supplied) into a wall 3.94 inches (10 cm) apart. Be sure to keep about 0.12 inch ( 3 mm) of the screw head out of the wall.

.94"	(10cm)
.94"
3

The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use them on any other materials. There is a danger that the unit may come off if used on other materials.

(3mm)0.12"

2 Mount the wall mount fittings as shown on the right.

Environmental Conditions

Avoid placing the unit in environments that are:

•humid or dusty

•exposed to direct sunshine

•subject to frequent or continuous vibrations

•outside the temperature range between 23˚F (-5˚C) and 113˚F (45˚C)

•affected by chemicals or ozone

7

Image 10

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions SignsDaily Care Features Accessories FeaturesInstalling Ribbon Cassette Precautions to take when replacing the ribbon Mounting Unit on Wall Environmental ConditionsDaily Operations Required DisabledFunctions for the buttons OptionalCard reassign All cards reset Card reset Page What YOU can do with 7000E OUT Total Setting Preparation for settingSetting the Display Hours Setting the Time ExampleSetting the Date Payroll Mode Setting the ModeSet the Mode Set the Starting day of the week Set the Starting dateSet the 1st starting date Set the 2nd starting dateJob Cost Mode Set the card ResetSetting the Print Format Set the Date/D.O.W. print formatSet the Hour print format Set the Minute print format for totals onlySet the Types of rounding Setting the RoundingSet the Rounding unit Setting the Auto Break Deduction Set the Elapsed timeSet the Max In Override Setting the MaxSet the Max In Value Setting the Button Function Setting the Daylight Saving Time Daylight saving time functionYear Month Date Mark means Starting date setting Set the ending date SETDeleting the daylight saving time settings Setting the Print Language Resetting Print Example Installing Ni-Cd Battery Optional Troubleshooting Error No. appearsSpecifications Manufacturers Warranty Form No. OM7E0209 Q0132-6120